In this study, SiC nanoparticles were added into matrix alloy through a combination of semisolid stirring and ultrasonic vibration while dynamic precipitation of second phases was obtained through multi-pass forging with varying temperatures. During single-pass forging of the present composite, as the deformation temperature increased, the extent of recrystallization increased, and grains were ...

Article history: Received: 08.11.2013. Received in revised form: 12.01.2013. Accepted: 14.01.2014. The grinding roller shaft is a key part of the grinding roller. It has a step-shaped shaft with different round cross-sections and 1850 mm × 1110 mm rectangular cross-section. If the general method of free forging is used, the upsetting diameter of ingot will reach 2900 mm, and 8400 t hydraulic pr...

The paper presents an investigation on the effect of process variables and material condition on forgeability of magnesium wrought alloys of Mg-Al-Zn group, AZ31, AZ61 and AZ91. The experimental work includes studies of forging capabilities of the alloys in closed-die forging at hot and warm-working temperatures. Forging tests are performed for material both in as-cast and asworked condition, f...

Influence of the constitutive flow law in FEM simulation of the Radial forging process. OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible. Radial forging is a widely used forming process for manufacturing hollow products in transport industry. As the deformation of the workpiece, during the process, is a c...

The knowledge-based system COFEX (Cold Forging Expert) has been developed to assist in the planning of the cold forging of a wide variety of tubular steel components. Following user-input of the required shape and dimensions of the finished forging, together with as many different sequences as desired, each operation is examined by the system by consulting the knowledge-base process rules and d...

Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...

Among the many input parameters of a forging process (for a multi-stage process one can count more than 200 different inputs!) the following important inputs shall be mentioned: Forging Material characteristics (flow curve = f(temperature, strain, strain rate, micro-structure) Influence of heat coefficients Friction type and friction value as well as lubrication Heat transfer Ambient media and ...

The Finite-Element-Analysis (FEA) is of major importance for the design and improvement of forging processes. In this field, FEA is traditionally used to predict die fill, residual stresses and forming forces. The intention of the work presented in this paper is the development of an advanced simulation model for the description of phase transformation processes in forging dies based on FEA. Th...

In the present investigation, an artificial neural network (ANN) model is developed to predict the isothermal hot forging behavior of AlCuMgPb aluminum alloy. The inputs of the ANN are deformation temperature, frictional factor, ram velocity and displacement whereas the forging force, barreling parameter and final shape are considered as the output variable. The developed feed-forward back-prop...

The continuum theory of sintering is used for the analysis of the stability of forging of a cylindrical powder specimen. The constitutive properties of the powder material are assumed to follow a power-law creep relationship. Temperature-coupled linear non-uniform stability analyses are carried out. Stability maps are obtained for forging of copper powder components.