Wireless MEMS sensors network has been widely used in many fields. In this paper the MEMS pressure sensor is integrated on a sensor board with Zigbee sensor network for real-time local bridge scour depth monitoring during a flood. The wireless MEMS pressure sensor scour monitoring system has been developed and tested in the laboratory. Local scour is one of the major factors for bridge failure....

Bridge piers which are constructed in the track of high water rivers cause some variations in the flow patterns. This variation mostly is a result of the changes in river sections. Decreasing the river section, bridge piers significantly impress the flow patterns. Once the flow approaches the piers, the stream lines change their order, causing the appearance of different flow patterns around th...

Social and economic damages are the most important damages of the bridge failure. Stability problems of such structures against failure and the depth of the abutments are directly related to the amount of the adjusted scour. Economy, reliability and stability have been main concerns regarding designing abutment bridges enhanced preventing scouring. In this study a detailed comparison of the up-...

There is presently a lack of knowledge of scour progression for complex offshore foundation structures, such as Tripod foundations for offshore wind turbines. Typically, scour is investigated in physical model tests. As an extension, parts of the investigations could be carried out by using numerical methods; however, such numerical methods require that all relevant processes leading to scour a...

This paper presents the use of genetic programming (GP) as a tool to predict pier scour depths based on clear-water conditions of laboratory measurements by past researchers. Four main dimensionless parameterspier width, approaching flow depth, threshold flow velocity, and channel open-ratio are considered for predicting the scour depth. The performance of the GP equation is verified by compa...

Physical model tests with the scale of 1:36 are carried out in the Near-Shore Wave Basin (NSWB) at Tainan Hydraulics Laboratory (THL) with the jacket-type offshore wind turbine foundation (jacket-type foundation) and the combination of hard or soft scour protection in the test area. Scouring around the jacket-type foundation exposed to wave and current was conducted in the NSWB with a mobile be...

Prediction of bridge pier scour depth is essential for safe and economical bridge design. Keeping in mind the complex nature of bridge scour phenomenon, there is a need to properly address the methods and techniques used to predict bridge pier scour. Up to the present, extensive research has been carried out for pier scour depth prediction. Different modeling techniques have been applied to ach...

A series of experiments was conducted to investigate the erosion behaviors of the noncohesive sediments downstream of smooth and rough aprons. A total of 33 tests were carried out with five different roughness conditions (k =0, 1, 1.85, 3.35 and 5mm) in a flume 0.5m wide, 0.6m deep and 9m long. For each run, s measurements were taken of the scour-hole profiles at the asymptotic or equilibrium s...

Prediction of maximum local scour is necessary for the safety and economical design of the bridges. A number of equations have been developed over the years to predict local scour depth using laboratory data and a few pier equations have also been proposed using field data. Most of these equations are empirical in nature as indicated by the past publications. In this paper attempts have been ma...