Measuring icing load and icing rate are important parameters for an atmospheric icing sensor. A new icing sensor has recently been designed and developed at Narvik University College for measuring atmospheric icing rate, icing load and icing type. Unlike the existing atmospheric icing sensors commercially available in market, which uses the axial loading for measuring icing load and icing rate,...

When applying axial load on piles subjected to negative skin friction (NSF), the yielded NSF is gradually eliminated. The process is notably influenced by the tip location (Y) and still a lack of understanding. This paper reports three-dimensional numerical simulations with tip locations Y = 1.00 pile diameter (D), 0.25D, 0.00D, and -1.00D. It is found that, against expectations, the dragload a...

The standard methodology for measuring loads in long bones is the in situ load cell, which enables direct measurements, but alters the stiffness and mass of the subject bone. Bone loading can also be calculated by applying linear beam theory to measurements from strain gauges affixed to the bone surface. The efficacy of the strain gauge method was assessed in this study by mounting three strain...

Thisstudy presents axially forced vibration of a cracked nanorod under harmonic external dynamically load. In constitutive equation of problem, the nonlocal elasticity theory is used. The Crack is modelled as an axial spring in the crack section. In the axial spring model, the nonrod separates two sub-nanorods and the flexibility of the axial spring represents the effect of the crack. Boundary ...

In this paper, buckling of cylindrical grooved shells under axial load has been examined by theoretical and experimental methods. The shell is made of USA/API – X42 5L steel standards. This material is one of the most common materials used in gas, oil and petrochemical industries. The effect of spiral grooves on cylindrical shell was analyzed, and the results obtained from the Abaqus software w...

BACKGROUND One- and two-level lumbar interbody fusion with unilateral instrumentation is as effective as that with bilateral instrumentation. The height of the interbody cage influences the operated segment stability and the fusion technique success. The purpose of this research was to determine the effect of the fusion cage height (i.e. long and short) on both the stability (based on flexibili...

Based on tests on six L-shaped RC columns with 500 MPa steel bars, the effect of axial compression ratios and stirrup spacing on failure mode, bearing capacity, displacement, and curvature ductility of the specimens is investigated. Test results show that specimens with lower axial load and large stirrup characteristic value (larger than about 0.35) are better at ductility and seismic performan...

using  principle  of  minimum  total  potential  energy  approach  in conjunction  with  rayleigh-ritz  method,  the  electro-thermo-mechanical  axial  buckling  behavior  of  piezoelectric  polymeric cylindrical  shell  reinforced  with  double-walled  boron-nitride nanotube  (dwbnnt)  is  investigated. coupling  between  electrical and mechanical  fields  are  considered  according  to  a  re...