A trace explosives detection system typically contains three subsystems: sample collection, preconcentration, and detection. Sample collection of trace explosives (vapor and particulate) through large volumes of airflow helps reduce sampling time while increasing the amount of dilute sample collected. Preconcentration of the collected sample before introduction into the detector improves the se...

Liquid chromatography/mass spectrometry (LC/MS), combining good separation characteristics with highly specific and sensitive detection, is the method of choice for forensic trace analysis of explosives. Principles of operation and instrumentation of several LC/MS interface/ionization modes are described. Among the various LC/MS interfaces and ionization modes, electrospray ionization (ESI)-LC/...

We present qualitative and quantitative component analyses on compound explosives via Terahertz time-domain spectroscopy (THz-TDS) based on a combination of wavelet thresholding and wavelength selection. Despite its importance, the field of signal processing of THz signals of compound plastic explosives is relatively unexplored. In this paper, experiment results from explosives Composition B-3 ...

The detection of explosives is a challenging topic. The nitrogen-14 nuclear quadrupole resonance technique exploits the transitions between the energy levels split by the quadrupole interaction to detect the presence of explosives. It is a very promising new technique owing to its unambiguous detection and identification of explosives with low false alarm, high sensitivity and fast detection. T...

This research was conducted to develop flowable slurry containing fibrous residuals from pulp and paper mills. Two types of flowable slurry containing ASTM Class C fly ash were produced: fly ash slurry and sandy slurry. Often, the fly ash slurry made without fibrous residuals showed a tendency to set rapidly, and become unworkable. When the cement-to-fly ash ratio was increased to extend the ti...

This study describes the biological degradation of TNT by using induced aeration. Three plastic reactors were used. In each reactor 3 kg of soil were used. In order to increase the porosity of the soil, sawdust was added to soil. Textile wastewater treatment plant sludge was also added to soil. TNT at the concentrations of 1000 mg/kg of soil was added thereafter. Rhamnolipid biosurfactant at th...

In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...

The use of slurry ice, both alone and in combination with ozone, as compared with traditional flake ice was investigated as a new refrigeration system for the storage of sardine (Sardina pilchardus). Microbiological, chemical and sensory analyses were carried out throughout a storage period of 22 days. According to sensory analyses, sardine specimens stored in ozonised slurry ice had a shelf li...