A one-dimensional array of nanopores horizontally aligned on a silicon substrate was successfully fabricated by anodic aluminum oxidation (AAO) using a modified two-step procedure. SEM pictures show clear nanostructures of well-aligned one-dimensional nanopore arrays without cracks at the interfaces of the sandwiched structures. The processes are compatible with the planar silicon integrated ci...

This study was designed to probe the fabrication of unique silver and gold nano-structures engaging a self-designed chitosan-porous anodic alumina nano-composite as a template. Porous anodic alumina has been manufactured by di-step aluminum anodization in an oxalic acid electrolytic bath. The surface properties of porous anodic alumina were reinforced by chitosan neutralized in sodium hydro...

Abstract YAG (Yttrium Aluminum Garnet) was successfully prepared through cathodic electrodeposition process using applying different current densities to the mixture of YCl3 and AlCl3 dissolved in water/ethanol 1:1 solution. Hydroxide precursors were cathodically grown on the cathode surface (at different current densities) and then the obtained hydroxide powder was heat-treated at 1100 °...

The melt-infiltration technique enables the fabrication of complex nanostructures for a wide range of applications in optics, electronics, biomaterials, and catalysis. Here, anemone-like nanostructures are produced for the first time under the surface/interface principles of melt-infiltration as a non-lithographic method. Functionalized anodized aluminum oxide (AAO) membranes are used as templa...

There is great interest in aluminum based plasmonic devices due to the relatively high plasma frequency of this material as well as its low cost and self-passivating oxide layer. The passivation layer provides aluminum plasmonics with the long-term stability required for practical applications. While several studies have investigated the impact of this oxide layer on the plasmon resonances of a...

In this contribution, we present an experimental and numerical study on the coating of Al plasmonic nanostructures through a conformal layer high-refractive-index molybdenum oxide. The investigated structures are closely coupled nanodisks where observe that effect thin is to help gap narrowing down sub-5-nm range, large electromagnetic field enhancement confinement can be achieved. solution rep...

A theoretical study was performed to evaluate the defersirox potency to chelate aluminum (Al) and gallium (Ga) as the toxic metals in biological systems. Deferasirox as an important class of chelators, which binds to the metallic center with the ratio of 1:2, is used to remove the toxic metals in the case of iron overload disease. The effects of water and DMSO as the solvent on the electronic n...

During recent years, the anodization of aluminum, due to its great commercial significance, represents one of the most important and widespread method used for the synthesis of ordered nanostructures. Whose geometry is controlled by diverse synthesis factors which include the voltage applied, the temperature of the electrochemical environment in which the synthesis is carried out, the reagent u...

Aluminum alloys are vulnerable to penetrating and peeling failures in seawater and preparing a barrier coating to isolate the substrate from corrosive medium is an effective anticorrosion method. Inspired by the lotus leaves effect, a wetting alloy surface with enhanced anticorrosion behavior has been prepared via etch, deposition, and low-surface-energy modification. Results indicate that exce...

An up-scalable approach for creating Fano-resonant nanostructures on large surfaces at visible wavelengths is demonstrated. The use of processes suitable for high throughput fabrication and the choice of aluminum as a cost-efficient plasmonic material ensure that the presented insights are valuable even in consideration of typical industrial constraints. In particular, wafer-scale fabrication a...