T h e prepara t ion and propert ies of combined a luminium oxide coatings have been investigated. T h e coating has been prepared in two steps. First , a luminium subs t ra te was anodically oxidized. In t he next s tep the anodized film has been coated by the sol-gel method . T h e condit ions of forming coatings wi thout shrinkage were obta ined empirically. It was found out t h a t the film ...

The purpose of this study is to compare the shear bond strength of different resin bases and artificial teeth made of ceramic or acrylic resin materials and whether tooth-base interface may be treated with aluminium oxide sandblasting. Experimental measurements were carried on 80 specimens consisting of a cylinder of acrylic resin into which a single tooth is inserted. An ad hoc metallic frame ...

Aluminium salt slag (also known as aluminium salt cake), which is produced by the secondary aluminium industry, is formed during aluminium scrap/dross melting and contains 15-30% aluminium oxide, 30-55% sodium chloride, 15-30% potassium chloride, 5-7% metallic aluminium and impurities (carbides, nitrides, sulphides and phosphides). Depending on the raw mix the amount of salt slag produced per t...

Traditional fibre-optic drawing involves a thermally mediated geometric scaling where both the fibre materials and their relative positions are identical to those found in the fibre preform. To date, all thermally drawn fibres are limited to the preform composition and geometry. Here, we fabricate a metre-long crystalline silicon-core, silica-cladded fibre from a preform that does not contain a...

Abstract: In this research plasma nitriding of pure aluminium and effect of iron elemental alloy on the formation and growth of aluminium nitride was investigated. Also corrosion properties of formed AlN were investigated. After preparation, the samples were plasma nitrided at 550oC, for 6, 9 and 12 h and a gas mixture of 25%H2-75%N2. The microstructure and phases analysis were investigated usi...

f liquid g gas ABSTRACT The experimental apparatus was build according to the national standards of India.. The performance of the refrigeration system depends upon the heat transfer capacity of the refrigerant. Normally R12, R22, R600, R600a and 134a are used as a refrigerant. This refrigerant heat transfer capacity is not so good and increase power consumption. Due to these limitation nanoflu...

PURPOSE The aim of this work is to evaluate different types of materials used for making implant abutments, by means of an in vitro study and a review of the literature, in order to identify the indications for a better choice of an implant-supported restoration in the anterior section. MATERIALS AND METHODS 5 implant abutments were tested in a random order in the superior anterior maxilla of...

Catechol-functionalized (salen)Mn complexes can be supported on mesoporous anodized aluminium oxide disks to yield catalytic membranes that are highly active in the enantioselective epoxidation of olefins when being deployed in a forced-through-flow reactor.

Metal and semimetal nanotube-nanowire heterojunction arrays have been achieved by sequential electrochemical-deposition inside the nanochannels of anodic aluminium oxide template with a layer of Au thin enough to leave the pores open.