The aim of this study was to evaluate the bone regeneration of hydroxyapatite (HA)/alumina bilayered scaffold with a 3 mm passage-like medullary canal in a beagle tibia model. A porous HA/alumina scaffold was fabricated using a polymeric template-coating technique. HA/alumina scaffold dimensions were 10 mm in outer diameter, 20 mm in length, and with either a 3 mm passage or no passage. A 20 mm...

Increasing uses of engineered nanoparticles (ENPs) in commercial products and industrial applications has eventually resulted to their releases into atmospheric, terrestrial, and aquatic environments. However, knowledge gaps in ENPs toxicity, fate, and behaviour currently limit our ability to quantify risk assessment of materials with nanoscale dimensions, and therefore, the extent of the resul...

THE following comments are directed to the sections (2) ‘‘revisit to the grain growth problems in alumina’’ and (3) grain growth without a liquid phase in the article of concern. The purpose of this comment is to challenge the authors’ assertions and refute the following arguments, namely, first that ‘‘MgO can be considered a very effective grain growth promoter in the sintering of alumina,’’ s...

Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt. Chemistry department, Faculty of Science, Taif University, KSA. _________________________________________________________________________________________ Nine alumina samples of various modification techniques were subjected to thermal analysis via thermogravimetric analysis (TGA) and differential thermal analysis (DTA), in order t...

Simultaneous application of colloidal processing and liquidforming additives to alumina resulted in a sintered density of >99% in 1 h at a temperature as low as 1070°C for a commercial high-purity alumina powder at a total dopant level of 2 mol%. The additives were 0.9% CuO + 0.9% TiOz + 0.1% B 2 0 3 + 0.1% MgO. At higher temperatures or after prolonged sintering, the doped alumina ceramic deve...

A comparison has been made of the infrared spectra of alumina with molybdenum oxide alumina in both the oxidized and reduced forms. In the case of molybdena-alumina prepared via adsorption of gaseous MoOp(OH)t, the spectra show that a practically complete monolayer of Mo6+ oxide covers the alumina. After reduction with hydrogen the hydroxyls of the carrier appear. From the reversibility of redu...

Porous alumina film on aluminum with gel-like pore wall was prepared by a two-step anodization of aluminum, and the corresponding gel-like porous film was etched in diluted NaOH solution to produce alumina nanowires in the form of densely packed alignment. The resultant alumina nanowires were reacted with NH(3) and evaporated aluminum at an elevated temperature to be converted into densely pack...

The growth of ordered nanorods of mesoporous SBA-15 inside a porous alumina membrane has been achieved for the first time by a simple sol-gel method. The obtained SBA-15 nanorods themselves have ordered hexagonal mesochannels with a size of about 6 nm and have been arranged to form hexagonal arrays by the limitation of pores of the alumina membrane. The synthesized alumina membrane with mesopor...

a simple method for fabrication of highly ordered gold nanorod film is introduced in this article. the procedure is based on thermal evaporation of gold into a porous anodic alumina film (paa). the ppa film was fabricated by combining the hard and mild anodization. this combination effectively decreases the processing time of fabrication of highly ordered porous anodic alumina film with control...

The effect of -tricalcium phosphate additive on the alumina matrix was investigated. The sintering behaviour of the alumina tricalcium phosphate composites was characterized by using magic angle spinning nuclear magnetic resonance, X-ray diffraction, dilatometry, differential thermal analysis and scanning electron microscopy analysis. The mechanical properties of composites have been investiga...