In this study, a very thin Ni/Au bilayer metal film was prepared by electron beam evaporation and thermal alloying to form ohmic contact on p-type GaN film. After thermal alloying, the current– voltage (I – V) characteristic of Ni/Au contact on p-type GaN film exhibited ohmic behavior. The Ni/Au contacts showed a specific contact resistance of 1.7310 V cm at an alloying temperature of 450 °C. I...

Gradient nanostructures (GNSs) have been optimized in recent years for desired performance. The diffusion behavior in GNS metals is crucial for understanding the diffusion mechanism and relative characteristics of different interfaces that provide fundamental understanding for advancing the traditional surface alloying processes. In this paper, atomic diffusion, reactive diffusion, and surface ...

A series of palladium-based catalysts of metal alloying (Sn, Pb) and/or (N-doped) graphene support with regular enhanced electrocatalytic activity were investigated. The peak current density (118.05 mA cm(-2)) of PdSn/NG is higher than the sum current density (45.63 + 47.59 mA cm(-2)) of Pd/NG and PdSn/G. It reveals a synergistic electrocatalytic oxidation effect in PdSn/N-doped graphene Nanoco...

Incorporation of liquid crystalline polymers (LCPs) into commodity polymers remains a challenge in the design of high-performance, low-cost polymeric blends. Blends of a thermoplastic polymer and a nematic LCP are produced here by mechanical alloying. Functionality sensitive X-ray microscopy reveals LCP dispersions as small as 100 nm in diameter. Intimate mixing remains upon subsequent melt pro...

Severe plastic deformation has the fascinating power of alloying equilibrium-immiscible elements, overriding the thermodynamic driving force (positive heat of mixing) that would dictate phase separation in equilibrium. This article briefly reviews the current understanding of this subject, in terms of experimental evidence for atomic-level alloying and phase selection, and in particular the mod...

the effect of rare earth (re) elements, including ce and la, on the sorption properties of zr-co getters was investigated in this work. the phase evolution, microstructural characteristics of getter powders were studied by means of x-ray diffraction method, scanning electron microscopy (sem) and energy dispersive x-ray spectroscopy (eds). the nanostructured zr3co intermetallic compound has been...

Mechanical alloying of Ti-Si and NiTi was performed by high-energy ball milling at ambient temperature. The structural and compositional evolutions during mechanical alloying were investigated. Results showed that the crystallite size of mechanically alloyed Ti-Si and Ni-Ti powders decreased with increasing milling time and the steady-state crystallite size was approximately 10 nm. The mechanic...

The effects of alloying on the lattice dynamics of vanadium were investigated using inelastic neutron scattering. Phonon densities of states were obtained for bcc solid solutions of V with 3d, 4d, and 5d transition metal solutes, from which vibrational entropies of alloying were obtained. A good correlation is found between the vibrational entropy of alloying and the electronegativity of transi...

In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...

This study investigated the structural stability and electrochemical properties of alloying additives M (M = Mn, V, Ti, Mo, or Ni) at the γ-Fe(111)/Cr2N(0001) interface by the first-principles method. Results indicated that V and Ti were easily segregated at the γ-Fe(111)/Cr2N(0001) interface and enhanced interfacial adhesive strength. By contrast, Ni and Mo were difficult to segregate at the γ...