Abstract—In this numerical study, effects of using Al2O3-water nanofluid on the rate of heat transfer have been investigated. Physical model is a square enclosure with insulated top and bottom horizontal walls, while the vertical walls are kept at different constant temperatures. Two appropriate models are used to evaluate the viscosity and thermal conductivity of nanofluid. The governing strea...

The authors present a study of the optical and magneto-optical properties of Co nanoparticles embedded in two amorphous dielectric matrices with different refractive indices such as ZrO2 and Al2O3. The nanostructured films were prepared by pulsed laser deposition, and the morphology and structure were studied by different characterization techniques. The optical and magneto-optical MO propertie...

wettability alteration is one of the most important methods for oil recovery from sandstone andcarbonate reservoirs. the effects of salinity, ph, temperature, and chemicals such as surfactants andfatty acids on the alteration of the wettability were described in previous studies. in recent years,attention has been directed to nanoparticles as a wettability alteration agent. the effect of somena...

A numerical simulation on confined impinging circular jet working with a mixture of water and Al2O3 nanoparticles is investigated. The flow is turbulent and a constant heat flux is applied on the heated plate. A two-phase mixture model approach has been adopted. Different nozzle-to-plate distance, nanoparticle volume concentrations and Reynolds number have been considered to study the thermal p...

agal2o3 nanocomposite were synthesized by solution combustion technique using ammonium carbonate as a new fuel under simultaneous combustion of alumina and silver particles condition. samples prepared with different amount of silver, were characterized by xrd, bet, sem and optical absorption measurements. xrd analysis was used to determine the change in phase and size of the synthesized nanopar...

The convective heat transfer and pressure drop of water based Al2O3 nanofluid in a horizontal tube subject to constant wall temperature condition is investigated by computational fluid dynamic (CFD) method. The Al2O3 nanofluid at five volume concentration of 0.1, 0.5, 1.0, 1.5 and 2 % are applied as a non Newtonian power law and Newtonian fluid with experimentally measured properties of density...

Drilling mud is a necessary component of drilling operations. There have been notable attempts to enhance the filtration and rheological properties increase cutting carrying capacity water-based (WBM) using nanoparticles (NPs). This study investigates how varying Al2O3 concentrations affect fluids. In this study, different muds were produced bentonite (2.8g) without nanoparticle, 50% (1.4g) Al2...

The Taguchi design of experiments (DOE) approach is adopted here to evaluate the impact ofeffective factors such as nanoparticles type, nanoparticles to model solution mass ratio, asphaltenestructure, and temperature on asphaltene adsorption equilibrium. Herein, the toluene-asphaltenesolution model is applied. Three commercially nanoparticles (SiO2, Al2O3, and TiO2) are used.<...

Considering interaction forces (gravity and buoyancy force, drag force, interaction potential force, and Brownian force) between nanoparticles and a base fluid, a two-phase Lattice Boltzmann model for natural convection of nanofluid is developed in this work. It is applied to investigate the natural convection in a square enclosure (the left wall is kept at a high constant temperature (TH), and...