In this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the SiC Abrasive slurry and Al2O3, use of diamond paste as abrasive tool) in Magnetic Abrasive Finishing process using designing of experiments on the external surface of Cylindrical work pieces of Stainless steel AISI 440C to get minimum surf...

In this paper, we present a review of the measurements that Dual Emission Laser Induced Fluorescence (DELIF) has allowed us to make over the last 8 years. We have been able to measure many features of the slurry film between the wafer and the pad during polishing while simultaneously measuring the frictional drag. In particular, we measured slurry mean residence time, slurry temperature, and th...

The oxidation kinetics of 5 vol% nano-Ni dispersed Al2O3 with Si-doping (nano-Ni/Al2O3-Si) was studied in the present paper. The starting powder mixture was prepared by drying aqueous slurry consisting of alumina with nickel nitrate and Si (OCH3)4. The powder mixture was reduced at 600 C for 12 h in a stream of Ar-1%H2 gas mixture. Nano-Ni/Al2O3-Si was densified by pulsed electric current sinte...

Purpose: To investigate the effect of slurry abrasive levels and acidic challenges on development non-carious cervical lesions.

The effectiveness of chemical amendment of pig slurry to ameliorate phosphorus (P) losses in runoff is well studied, but research mainly has concentrated only on the runoff pathway. The aims of this study were to investigate changes to leachate nutrient losses, soil properties and greenhouse gas (GHG) emissions due to the chemical amendment of pig slurry spread at 19 kg total phosphorus (TP), 9...

This paper develops analytically a statistical model for predicting the material removal in mechanical polishing of material surfaces (MS). The model was based on the statistical theory and the abrasive–MS contact mechanisms. The pad-MS and pad-abrasive-MS interactions in polishing were characterised by contact mechanics. Two types of active abrasive particles in the polishing system were consi...

OBJECTIVES To investigate the loss of enamel and dentin surface caused by the interaction between abrasives in toothpaste and toothbrush filament stiffness. METHODS The study followed a 2 (high-level or low-level abrasive; silica) × 3 (filament stiffness; soft, medium or hard) × 2 (cycling time; 3 or 5 days) factorial design. Polished bovine enamel and dentin specimens (n = 8 each per group) ...

engineering ceramics due to high-strength-to-weight ratio, wear and corrosion resistance, and high strength temperatures, in the industries especially in aerospace, automobile, electronics and computers are used widely. in attention to the  increasingly usage process of these material, applying of conventional machining methods  for producing  machined into complex and desired shapes or making ...

An experimental study of the rotary ultrasonic drilling of ceramics is first presented. The influence of different process parameters on the material removal rate for machining of magnesia stabilized zirconia is examined. Then a mechanistic approach to modeling the material removal rate during rotary ultrasonic drilling of ceramics is proposed and applied to predicting the material removal rate...

The process of giving effect or attrition on the denim is a situation that develops day by according to fashion trends have developed in recent years. try achieve more matte appearance gradually removing these materials means paint deformation, while fiber not allowed break brittle working surfaces particles, where hard and amorphous provide kind fine sanding function. aging generally done rand...