In the present study, insert materials manufactured with a 3D printer were used to increase strength of T-type adhesive joints, which have an important area use in aviation and aerospace applications. Experiments carried out for 3 different overlap lengths bending radius. addition unreinforced samples, 4 material designs each length: solid-reinforced model, hollow reinforced vertically horizont...

A finite element evaluation of local stresses in the adhesive and adherends is presented for a tongue-and-groove joint of a homogenized thick composite laminate to steel plate. The quasi-isotropic laminate is made of glass fabric/vinyl ester plies. Most results are obtained for elastic response of the Dexter-Hysol 9338 adhesive that was used in recent experiments (Compos Sci Technol 61 (2001) 1...

Elements based on the exact stiffness matrix method contain an embedded analytical solution that can capture detailed local fields, enabling more efficient mesh independent finite element analysis. In the present study, this method was applied to adhesively bonded joints. The adherends were modeled as Euler-Bernoulli beams, and the adhesive layer was modeled as a bed of linear shear and normal ...

Adhesion promoting monomers for precious metals, 2,3-epithiopropyl methacrylate (EP1MA), 4,5-epithiopentyl methacrylate (EP3MA), 9,10-epithiodecyl methacrylate (EP8MA), 10,11-epithioundecyl methacrylate (EP9MA), 9,10-epithiodecyl 4-vinylbenzoate (EP8VB), 2,3-epithiocyclohexyl methacrylate (EPCHMA), and 3,4-epithiobutyl 2,2-bis(methacryloyloxymethyl)-propionate (EP2BMA), were used as surface tre...

This paper investigates the effect of outer adherend geometry on strength an adhesively bonded joint. The investigation was carried out by optimizing joint using two different numerical optimization methods. In genetic algorithm (GA) with high fidelity explicit finite element analysis (FEA) and topology (TOP). Both procedures were utilized a simplified pseudo-2D model as well full-scale 3D mode...

Stresses can be measured by X-ray diffraction, not only in metals but also in polymeric composites containing some crystalline filler particles. Diffraction is found effective in disclosing the distribution of stresses over the surface of adhesively bonded joints in aluminum strips when loads well below the yield point are applied. When two 606l-T6 aluminum strips 1/16" or l/32" thick and 3/4" ...