It is well known that in blend modification, PC(Polycarbonate)/ABS(Acrylonitrile-Butadiene -Styrene) alloy polymers were used very common , but because of its high production cost and poor processing performance limited its application in marine materials. To improve the problem, We studied the behavior of ABS/PC alloy performance, and made a lot of exploration to increase the toughness, made i...

The thermoplastic materials such as acrylonitrile-butadiene-styrene (ABS) and Nylon have large applications in three-dimensional printing of functional/non-functional prototypes. Usually these polymer-based prototypes are lacking in thermal and electrical conductivity. Graphene (Gr) has attracted impressive enthusiasm in the recent past due to its natural mechanical, thermal, and electrical pro...

In this research, on the basis of the control of electrostatic charge, a laboratory-scale triboelectrostatic separation for separating polypropylene (PP) and acrylonitrile-butadiene-styrene (ABS) in seaweed-drying net frame plastic wastes has been carried out. High density polyethylene (HDPE) in a charger material selection tests using a vertical-reciprocation system was found to be the most ef...

Abstract FFF (Fused Filament Fabrication) prototyping method is mostly used in the fabrication of 3D complex geometric shapes. Layer by layer deposition technology offers a wide range shapes for plastic parts. The mechanical characteristics manufactured parts depends on material and printing parameters. studies conducted this paper show influence parameters tensile properties ABS (Acrylonitrile...

This study aims to determine the compression strength of Fused Deposition Material (FDM) additive manufacturing with parameters in different layer thicknesses between 0.10 – 0.35 mm. The specimen process refers ASTM D695 Standards ABS (acrylonitrile butadiene styrene) and PLA (polylactic acid) materials. Based on test results, highest is found 0.15 mm thickness material a yield value 66.78 MPa....

In this paper we look at Acrylonitrile Butadiene Styrene (ABS) and Polyethylene Terephthalate Glycol (PETG), chosen for their low cost, high strength temperature resistance. This study evaluates the bending fatigue performance of Material extrusion (MEX) ABS PETG cantilever beams compares properties while varying a printing parameter under thermal loads. The study, using custom building orienta...

Many new biomarkers are being studied, in addition to classical biomarkers, such as chemical substances and their metabolites in blood and urine and modified enzymes. Among these new biomarkers, hemoglobin adducts are thought to be especially useful for the estimation of chemical exposures. We review here the use of biomarkers for monitoring exposures to nine substances, mainly focusing on PRTR...

This paper discusses some basic metrology considerations when 3D printing. The importance of ensuring correct measurements is highlighted especially for practical applications. last part the presents sample dimensional 3D-printed parts with varying sizes, infill density and layer thickness. Different cube sizes 10 mm3, 15 20 mm3 has been produced using a commercially-available printer. Acryloni...

This study aims to determine the impact strength of Fused Deposition Material (FDM) additive manufacturing with parameters in different layer thicknesses between 0.10 – 0.30 mm. The specimen process refers ASTM D256 Standards ABS (acrylonitrile butadiene styrene) and PLA (polylactic acid) materials. Based on test results, specimens a thickness mm had largest 0.078 J/mm 2 , while smallest was fo...