in this paper, a higher order continuum model is presented based on the cosserat continuum theory in 3d numerical simulation of shear band localization. as the classical continuum models suffer from the pathological mesh-dependence in strain softening models, the governing equations are regularized by adding the rotational degrees-of-freedom to conventional degrees-of-freedom. the fundamental r...

in this paper, the operation of helix traveling wave tube in interaction region is investigated by using a three dimensional large signal lagrangian model in frequency domain. the complete simulation of these tubes is essential for optimum design and minimum manufacturing cost. this 3d code can compute interception current (or current losses ), beam radius changes in interaction region and the ...

background: current methods of closure of the cleft palate result in the formation of scars and impairment of growth. distraction osteogenesis (do) might be an effective means to repair or at least reduce the size of wide clefts. this study investigates the biomechanical aspects of this process. materials and methods: do simulation was applied to reduce the size of a unilateral hard palate clef...

abstract: compaction under tractors tires is of special concern because the weight of these machines has increased dramatically in the last years. these machines and others associated with crop cultural practices weight enough to significantly compact the soil, especially if the soil is soft with high moisture content during tilling, planting, or harvesting. the stress distribution and the size...

most of river engineering problems are complicated and need to be analyzed by three dimensional models of flow and sediment transport. considering the fact that computers and numerical methods with great ability of flow and sediment transport simulation are developing quickly, using numerical modeling by engineers is inevitable. nevertheless, before application, numerical models need to be veri...

this study investigated the performance and aeroelastic characteristics of a wind turbine blade based on strongly coupled approach (two-way fluid structure interaction) to simulate the transient fsi1 responses of hawt2. aerodynamic response was obtained by 3d cfd-urans approach and structural response was obtained by 3d finite element method. aeroelastic responses of the blade were obtained by ...

we use a multi-resolution analysis based on a wavelet transform to upscale a 3d fractured reservoir. this paper describes a 3d, single-phase, and black-oil geological model (gm) that is used to simulate naturally-fractured reservoirs. the absolute permeability and porosity of gm is upscaled by all the possible combinations of haar, bior1.3, and db4 wavelets in three levels of coarsening. the ap...

the present work reports and discusses the results of a 3d simulation of the injection molding process of a rubber compound that includes the mold flling stage and  material curing, using the computer code is developed in “udf” part of the fluent 6.3 cae software. the data obtained from a rheometer (mdr 2000) is used to characterize the rubber material in order to fnd the cure model parameters ...

Introduction: Geometric distortion, an important parameter in neurology and oncology. The current study aimed to design and construct a new three-dimensional (3D) phantom using a 3D printer in order to measure geometric distortion and its 3D reproducibility. Material and Methods: In this study, a new phantom ...