There is interest in using zirconia for biomedical applications as ball heads for total hip prostheses. Two potential types are under discussion: partially stabilized zirconia (PSZ) and tetragonal zirconia polycrystals (TZP) materials. Because of its enhanced material properties, TZP stabilized with yttria is favourable. To eliminate high amounts of natural radioactive impurities, the precursor...

The aim of this in vitro study was to evaluate the effect of silica and aluminosilicate nanocomposite coating of zirconia-based dental ceramic by a sol-gel dip-coating technique on the bond strength of veneering porcelain to the yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) in vitro. Thirty Y-TZP blocks (10 mm ×10 mm ×3 mm) were prepared and were assigned to four experimental groups...

Problem statement: This study presented bone like apatite formation on yttria stabilized zirconia in Simulated Body Fluid (SBF) through hydroxylation technique. Approach: Sol gel route was used to prepare yttria stabilized zirconia. Then it was hydroxylated with 5M H3PO4 for formation of Zr-OH group. Moreover, the growth rate of calcium and phosphate on zirconia substrate was examined using sim...

Yttria-stabilized zirconia (YSZ)-based thermal barrier coating (TBC) has been integrated with thermographic phosphors through air plasma spray (APS) for in-depth; non-contact temperature sensing. This coating consisted of a thin layer of Dy-doped YSZ (about 40 µm) on the bottom and a regular YSZ layer with a thickness up to 300 µm on top. A measurement system has been established; which include...

The microstructure and morphology of solid-oxide fuel-cell electrodes are very complex but important because they strongly affect the electrical performance of the cell. In this work the high-resolution X-ray nanotomography technique is applied to reconstruct the three-dimensional microstructure of a (La(0.8)Sr(0.2))(0.95)MnO(3) yttria-stabilized zirconia composite cathode. Some key microstruct...

An yttria stabilised zirconia which exhibits a coreshell microstructure was investigated as a method to produce a zirconia with high ionic conductivity and improved thermal shock resistance. Zirconia grains consist of an outer shell of tetragonal zirconia with an inner core of monoclinic phase zirconia. Impedance spectroscopy was used to identify the e€ect of processing conditions on the grain ...

In recent years, 3 mol% yttria stabilized tetragonal zirconia polycrystals (3Y-TZP) doped with copper oxide has obtained increasing interest due to its enhanced superplasticity and good potential in tribological applications. In this work, the effect of addition of small amounts (0.8 mol%) of CuO on the sintering behaviour of 3Y-TZP was studied using a dilatometer and high temperature X-ray dif...

Modern gas turbine hot sections need to be protected from elevated temperature and damaging environments. This protection starts as a typically two layer coating system, the base layer or bond coat (BC) acts as a corrosion barrier and a kind of buffer for the thermal mismatch between the base material and the second top thermally protective layer or Thermal Barrier Coating (TBC). The BC is norm...

BACKGROUND Zirconia was introduced as an alternative to alumina for use in the femoral head. The yttria stabilized zirconia material was improved by adding alumina. We evaluated highly cross-linked polyethylene wear performance of zirconia in total hip arthroplasty. The hypothesis was that alumina stabilized zirconia could decrease highly cross-linked polyethylene wear. METHODS Highly cross-l...