The purpose of this work was to fabricate zirconia copings from fully sintered Y-TZP blocks using a Nd:YVO4 nanosecond laser in order to avoid complicated procedures using conventional CAD/CAM systems. To determine the most appropriate power level of a Nd:YVO4 laser, cuboid fully sintered Y-TZP specimens were irradiated at six different average power levels. One-way ANOVAs for the average surfa...

PURPOSE This study was conducted to evaluate the effects of different phosphate monomer-containing primers on the shear bond strength between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramics and MDP-containing self-adhesive resin cement. MATERIALS AND METHODS Y-TZP ceramic surfaces were ground flat with #600-grit SiC paper and divided into six groups (n = 10). They were treated as foll...

Novel low-dimensional thermoelectric (TE) materials suffer from poor mechanical reliability, which limits their applications, especially in mechanically harsh environments. Here, we propose a new concept, in which the novel, abundant, thermally stable TE-nanostructures are dispersed and then intimately embedded inside a protective, mechanically reliable tetragonal ZrO2 (TZP) ceramic matrix with...

This study examines the effects of different ZrB2 content on various mechanical properties and electrical conductivity of ZrB2/Y-TZP composite. Composites with ZrB2 content of up to 20 wt-% were particularly beneficial at the lower sintering temperature range by achieving greater densification and better hardness than Y-TZP monolith. In contrast to the trends estimated from rule of mixture, the...

Yttrium tetragonal Zirconia polycrystals (Y-TZP) based systems are the more recent addition in to the high-strength all-ceramic systems that are used for crowns and fixed partial dentures. CAD/CAM produced Y-TZP based systems are being used and are said to be in demand in the aesthetic zone and in stress bearing regions as well. This systematic overview covers results of recent scientific studi...

Zirconia is now favored over titanium for use in dental implant materials because of its superior aesthetic qualities. However, zirconia is susceptible to degradation at lower temperatures. In order to address this issue, we have developed modified zirconia implants that contain tantalum oxide or niobium oxide. Cells attached as efficiently to the zirconia implants as to titanium-based material...

INTRODUCTION The purpose of this study is to explore the feasibility of yttria-stabilized zirconia (Y-TZP) in fixed lingual retention as an alternative to stainless steel. METHODS Exploratory Y-TZP specimens were milled to establish design parameters. Next, the specimens were milled according to ASTM standard C1161-13 and subjected to 4-point flexural tests to determine material properties. F...

The aim of this in vitro study was to evaluate the effect of silica and aluminosilicate nanocomposite coating of zirconia-based dental ceramic by a sol-gel dip-coating technique on the bond strength of veneering porcelain to the yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) in vitro. Thirty Y-TZP blocks (10 mm ×10 mm ×3 mm) were prepared and were assigned to four experimental groups...

STATEMENT OF PROBLEM Ceria-stabilized tetragonal ZrO(2)/Al(2)O(3) nanocomposite (Ce-TZP/A) offers superior properties compared to yttria-stabilized zirconia (Y-TZP). However, the bond quality to veneering ceramics has not been investigated. PURPOSE The purpose of this study was to evaluate the bond strength of different veneering ceramics to Ce-TZP/A. MATERIAL AND METHODS Cubes of Ce-TZP/A ...

Two types of tetragonal zirconia polycrystals (TZP), a ceria-stabilized TZP/Al2O3 nanocomposite (CZA) and a conventional yttria-stabilized TZP (Y-TZP), were sandblasted with 70-microm alumina and 125-microm SiC powders, then partially annealed at 500-1200 degrees C for five minutes. Monoclinic ZrO2 content was determined by X-ray diffractometry and Raman spectroscopy. Biaxial flexure test was c...