dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. in this study, x53crmnnin219 (austenitic stainless steel) and x45crsi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. the welded joint was then heat treated at 760 0c for 60 min. mechanical prop...

Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...

Ti6Al4V titanium alloy is applied extensively in the aviation, aerospace, jet engine, and marine industries owing to its strength-to-weight ratio, excellent high-temperature properties and corrosion resistance. In order to extend the application range, investigations on welding characteristics of Ti6Al4V alloy using more welding methods are required. In the present study, Ti6Al4V alloy sheets w...

Fusion welding of heat treatable aluminum alloys leads to a significant loss of strength in the heat affected zone (HAZ) due to overaging. This work was aimed to improve the mechanical properties of Al-6061 welds. Plates of 6 mm in thickness were solutionised at 530◦C for 1 h followed by water quenching and aging at 160◦C for times between 13 to 19 hours. Welding was performed with the gas meta...

Welding method and its parameters has an important effect on the formability and mechanical properties of tailor welded blanks(TWBs). In this study gas tungsten arc welding(GTAW) is used to joint aluminum TWBs. Aluminum TWBs consist of 6061 aluminum sheets with different thickness of 1mm and 2mm. Main parameters of GTAW consist of welding current, pressure of shielding gas, welding speed and di...

In this study, a three-dimensional (3D)finite elementmodel is developed to investigate thermally induced stress field during hybrid laser–gas tungsten arc welding (GTAW) process. In the hybridwelding case, we focus on the GTAWprocess sharing commonmolten poolwith laser beam and playing an augment role in thehybridweldingsystem.Anexperiment-based thermalanalysis isperformedtoobtain the temperatu...

Laser-based ultrasonic (LBU) measurement shows great promise for on-line monitoring of weld quality in tailor-welded blanks. Tailor-welded blanks are steel blanks made from plates of differing thickness and/or properties butt-welded together; they are used in automobile manufacturing to produce body, frame, and closure panels. LBU uses a pulsed laser to generate the ultrasound and a continuous ...

in this paper, hardness and tensile properties of welded zone of aluminum 1100 alloys by friction stir welding process was investigated and the effects of rotational and traverse speeds of tool on these parameters was studied. also the fracture cross-section of welded samples was investigated. according the results of this paper, the hardness of weld material is higher than base material and is...

1 ATE-80212044©Asian-Transactions September 2012 Study the Effect of Welding Joint Location on the Fatigue Strength and Fatigue Life for Steel Weldment Dr.Ali Sadiq Yasir Kufa University / Faculty of Engineering Mechanical Engineering Department IRAQ E-mail:[email protected] / [email protected] Abstract: The welding process is one of the oldest joining processes between the ma...