To satisfy the requirement on solid-liquid separation in high-density waste drilling mud, prepare the nano-modified polyacrylamide (PAM) flocculant for high density waste drilling mud by in-situ dispersion method, direct dispersion method and simultaneous formation method. The result showed the flocculent effect of nano-modified polyacrylamide prepared by simultaneous formation method was the b...

optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. the selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. this paper describes the development of analytical...

When drilling an oil well, the well is lined by sinking a steel casing, or liner, into the drilling mud (see Figure 1). The inside of the liner forms a central pipe, and leaves an annular gap between the outside of the liner and the surrounding rock. The inside and outside of the liner are initially filled with drilling mud, which is displaced by pumping a sequence of fluids down inside the lin...

Optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. The selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. This paper describes the development of analytical...

The narrow operating window between pore pressure and fracture pressure makes drilling difficult in some operations. A feasibility study of managed pressure drilling (MPD) is carried out on Iran Darquain oil field. The previous wells drilled in this field showed that mud returns were lost during drilling Gadvan formation. The present work addresses this problem by means of surface back pressure...

This study investigates the effect of functionalized Multi-Walled Carbon NanoTube (f-MWCNT) on rheological properties of water-based drilling muds. Functionalization of multi-walled carbon nanotube was performed by introducing a hydrophilic functional group onto the surface of nanotubes via acid treatment. In order to guarantee the results, X-ray fluorescence, transmission...

Starch is one of the most widely used biopolymers in water based drilling fluids to control fluid loss. The thermal stability of starch in common drilling fluids is low (93 °C). In this study, the thermal stability of starch has been evaluated in sodium/potassium formate and potassium chloride fluids. Samples of mud were prepared by formate salts (sodium and potassium) and potassium chloride wi...

Generally, the drilling mud is divided into three groups of oil (gas oil) and gas based on its base (the main phase), which is often mixed drilling mud from two or more times a mixture of all three fluids that are present at the same time. In this paper, we first investigate the types of drilling flowers, and then we study the pollution of the types of drilling flowers that...

During the Integrated Ocean Drilling Program (IODP) Expedition 331 at the Iheya North hydrothermal system in the Mid-Okinawa Trough by the D/V Chikyu, we conducted microbiological contamination tests of the drilling and coring operations. The contamination from the drilling mud fluids was assessed using both perfluorocarbon tracers (PFT) and fluorescent microsphere beads. PFT infiltration was d...

Fluid invasion from water-based drilling mud (WBDM) into the shale formations causes swelling, high pressure zone near the wellbore wall, and eventually wellbore instability problems during drilling operations. For the stability of the wellbore, physical plugging of nanoscale pore throats could be considered as a logical approach toward avoiding the fluid invasion into the shale formation. This...