fluid invasion from water-based drilling mud (wbdm) into the shale formations causes swelling,high pressure zone near the wellbore wall, and eventually wellbore instability problems duringdrilling operations. for the stability of the wellbore, physical plugging of nanoscale pore throats couldbe considered as a logical approach toward avoiding the fluid invasion into the shale formation. thispap...

Wellbore instability in oil and gas drilling is resulted from both mechanical and chemical factors. Hydration is produced in shale formation owing to the influence of the chemical property of drilling fluid. A new experimental method to measure diffusion coefficient of shale hydration is given, and the calculation method of experimental results is introduced. The diffusion coefficient of shale ...

maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. if viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. in this study, synthesis of alumina/polyacrylamide nanocomposite through solution polymerization method was performed. rheological behavior of m...

The past decade has seen increased focus on nanoparticle (NP) based drilling fluid to promote wellbore stability in shales. With the plugging of NP into shale pores, the fluid pressure transmission can be retarded and wellbore stability can be improved. For better understanding of the interaction between shale and NP based drilling fluid based on previous pressure transmission tests (PTTs) on A...

fluid properties with constant improvement in efficiency have been noticeable as important criteria in drilling operation. the main drilling fluid properties highly depend on utilization of new polymers with high efficiency in drilling fluid composition. in this paper, the performance of a new polymer, called partially hydrolyzed polyacrylamide polymer (phpa), is studied which has recently ente...

Formate drilling and completion fluid system is a new type of clean organic salt brine system which has been developed from inorganic salt brine drilling fluid system. It is beneficial to protecte and find hydrocarbon reservoir. Due to the solid free system, the damage of solid phase particles on reservoir, especially low permeability oil and gas layer, can be greatly eliminated, at the same ti...

Deep-subsurface samples obtained by deep drilling are likely to be contaminated with mesophilic microorganisms in the drilling fluid, and this could affect determination of the community structure of the geothermal microflora using 16S rRNA gene clone library analysis. To eliminate possible contamination by PCR-amplified 16S rRNA genes from mesophiles, a combined thermal denaturation and enzyme...

Maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. If viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. In this study, synthesis of Alumina/Polyacrylamide nanocomposite through solution polymerization method was performed. Rheological behavior of m...

Maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. If viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. In this study, synthesis of Alumina/Polyacrylamide nanocomposite through solution polymerization method was performed. Rheological behavior of m...

Amine compounds are believed to have acceptable results regarding their use as clay swelling inhibitor and corrosion inhibitor additives in drilling fluids. It is crucial to know the capability of amine compounds to enhance the thermal stability of drilling fluid; herein, a water-based fluid composed of biopolymer and other additives as the proper representatives of muds used in the pay zone se...