The results of several perforated steel thin-walled U-shaped sections subject to compression are presented. The ultimate strength obtained from experimental tests is compared to the one obtained from numerical simulation by finite element method. The experimental tests were carried out according to the standard 10.2.02 of the FEM. The meshing, loading, boundary conditions for supports, geometri...

Several deficient steel structural members require to be strengthened all over the world. In this article, horizontal defects were generated at three locations (top, middle, and bottom) on the middle element and the middle of the side element. Consequently, the effects of the location of such defects on axial behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened steel Square Hollow Se...

Concrete columns confined with high-strength fiber reinforced polymer (FRP) composites can enhance the strength as well as the ductility of such structures. In recent years, the use of FRP composites to repair and strengthen existing reinforced concrete (RC) structures has been widely used. When the columns of existing RC structures are wrapped with FRP composites, the core concrete of such col...

the rotational friction dampers can be improved the seismic behavior of the steel structures, and they can be reduced the internal forces in the bracing members, columns and the other structural members. in this research, a simple method for modeling and analysis of braced frames equipped by these dampers is proposed. the proposed model describes seismic behavior of dampers very well and it is ...

buckling instability is the most important factor at columns failune. icauses large deflection and mostly is analysed by first yield criterion. due fo some difficulties in application of the criterion, soecially in inelastic columns, a new method, namely geometric criterion is introduced in this paper to improve the buckling analysis of real columns. in this research project a number box- secti...

Spliced joints are used widely in retrofitting traditional timber structures, especially in heritage conservation applications where as much original material as possible needs to be retained. However, in practice this method is mainly applied based on experience, and there is a lack of understanding and quantification of the mechanical behaviour of retrofitted timber members. This paper presen...

Reinforcement grades higher than 75 ksi (520 MPa) are not allowed in members that form plastic hinges due to a lack of information on material characteristics and on the seismic performance of columns constructed with high-strength steel (HSS) reinforcement. This research investigated the performance of reinforced concrete columns containing Grade 80 (minimum yield strength of 80 ksi [550 MPa])...

This paper presents the results of an experimental study into the behavior of concrete-filled steel tube columns confined by fiber-reinforced polymer (FRP). Eleven columns were tested to investigate the effects of the FRP layer number, the thickness of the steel tube and concrete strength on their load capacity and axial deformation capacity. The experimental results indicated that the FRP wrap...

This paper reports the findings of research examining the blast resistance of bridge piers that are designed in accordance with current knowledge and specifications to ensure ductile seismic performance. Blast testing was conducted on 1/4 scale ductile RC columns, and nonductile RC columns retrofitted with steel jacketing. The seismically designed RC and steel jacketed RC columns did not exhibi...

of bridges are typically based on simplified analyses or empirical data from recent earthquakes. Since earthquake damage data are very scarce in the central and southeastern United States (CSUS), using analytical methods is the only feasible approach to obtain fragility curves. In 1990, bridges in the CSUS began incorporating seismic details. Some of the changes included the component design fo...