Roughness elements or turbulence promoters have been widely used to enhance heat transfer in cooling passages of modern gas turbine blades. Although such ribs substantially enhance heat transfer, the heat transfer coefficient is reduced immediately at corner downstream of each rib, creating hot spots. To remove such hot spots some of the ribs can be detached from the channel walls. In this pape...

An experimental investigation was carried out to study mixed convection heat transfer from Al2O3-water nanofluid inside a vertical, W-shaped, copper-tube with uniform wall temperature. The tests covered different ranges of some involved parameters including Reynolds number, temperature and particles volume fraction. The results showed that the rate of heat transfer coefficient improved with Rey...

mixed convection fluid flow and heat transfer of water-al2o3 nanofluid inside a lid-driven square cavity has been examined numerically in order to find the optimal distribution of discrete heat sources on the wall of a cavity. the effects of different heat source length, richardson number and grashof number on optimal heat source location has been investigated. moreover, the average nusselt num...

the excellent performance of fluidized bed heat exchangers is due to the interaction between particles and heat transfer surface and to the mixing effects in the viscous sublayer. in this paper, the results of experimental investigations on heat transfer for a wide range of newtonian and non-newtonian (shear-thinning power law) fluids are presented. new design equations have been developed for ...

 Abstract: This paper presents the results of an experimental examination of the effect of non-uniform wall temperature on local heat transfer coefficient in a rotating smooth-walled square channel. Three different thermal boundary situations were investigated: (a) even and odd (four) wall uniform temperature, (b) even and odd (four) wall uniform heat flux, and (c) even (leading and trailing) w...

There are heat losses during the cycle of real engine that are neglected in ideal air-standard analysis. In this paper, the effect of heat transfer on the net output work is shown and thermal efficiency of the air-standard Atkinson and the Dual combustion cycles are analyzed. Comparison of performances of the air-standard Atkinson and the Dual combustion cycles with heat transfer considerations...

in this paper, free convection in an inclined stepped chamber has been studied. one wall of this enclosure is kept cold and the opposite wall equipped with constant heat source. the remaining walls are maintained adiabatic. there is one adiabatic step on the bottom wall. the aim of the present study is to forecast the effect of raleigh number, slope of enclosure, step dimension, and heat source...