AIM To evaluate the mechanical properties (ultimate tensile strength, elongation and hardness) of the commercially pure titanium (cp Ti) as casting and after ceramic firing cycles. MATERIALS AND METHODS Dumbbell-shaped specimens were prepared for the tensile strength testing. Disk-shaped cast specimens were used for microhardness testing. The ceramic firing cycles were made simulating a low f...

in this paper, the effect of prestrain on strain aging of low carbon steels, in the temperatures of 100°c and 200°c and the aging time of 50 minutes, and also the effect of aging temperature on strain aging in a constant aging time and prestrain, are investigated. the results of experiments show that with increasing the amount of prestrain, the increase in yield stress and ultimate tensile stre...

A study has been conducted on amine-cured epoxy resins and the effects on the ultimate burst strength of internally loaded glass-reinforced filament-wound vessels when these rosins were used as the plastic matrices. The tensile properties of the niatrLx were changed by systematically altering the molecular structure of the amine-cured epoxy resin. It was found that resintensile properties had a...

one of the most important applications of carbon nanotubes (cnts) is as reinforcement of metal matrix composites, because of their excellent mechanical properties. in this study, al-tio2-multi walled carbon nanotubes (mwcnts) nanocomposite is fabricated using isostatic pressing followed by hot extrusion. mechanical alloying is used to mix powders of aluminium, tio2 and mwcnts. tio2 with the amo...

Using natural hemp fibers to reinforce the tensile characteristics of polymer matrix composites is investigated in this article. The fibers were applied to the epoxy matrix in unidirectional and hybrid tissue forms. After preparation of standard tensile stress test specimens via manual layup, the standard tensile test was done.  Young’s modulus, ultimate tensile stress, and the amount of absorb...

In pressworking, large forces cut or deform a material, and specific shearing processes include blanking piercing of metals, including aluminum. The force requirement is directly proportional to the ultimate shear strength, USS, sheared material. Nevertheless, strengths are not readily found in engineering references, especially for multitude aluminum grades tempers. Thus, USS often estimated f...

In this study we have investigated in influence of location, gender and orientation on the deformation characteristics of 55 samples of human excised skin. Uniaxial tensile tests were carried out at a strain rate of 0.012s on excised human skin from the back. The deformation characteristics of skin (Ultimate Tensile Strength (P<0.0001), Failure Strain (P=0.0177), Young’s Modulus (P<0.0076), Ini...

The tensile properties of materials, such as the ultimate tensile strength, yield strength, elongation and elastic modulus, are very important factors for engineering designs. However, it is not easy for students to understand and evaluate the tensile properties of materials. In this study, a small and handy tensile testing machine was designed to help students conduct tensile tests in class us...