Optimizing the refrigerant circuitry for a finned-tube evaporator is a daunting task for traditional exhaustive search techniques due to the extremely large number of circuitry possibilities. For this reason, more intelligent search techniques are needed. This paper presents and evaluates a novel optimization system, called ISHED1 (Intelligent System for Heat Exchanger Design). This system uses...

Use of angle iron separators in two evaporator vessels at Darnall resulted in a marked reduction in entrainment rates. Efficiencies in excess of 90% were observed with negligible pressure differential across the separator. Separator efficiency can be evaluated rapidly by using a centrally based Auto-Analyser. Introduction To avoid sugar losses by entrainment, all evaporator vessels are fitted w...

The removal of calcium and magnesium ions (softening) from clear juice can be beneficial to downstream processes. Such benefits include reduced evaporator scaling and the improved potential for the application ofion exclusion chromatography for additional sucrose recovery. The results of experiments in the laboratory and on a pilot plant scale are presented. These show that it is possible to so...

Silica presents a particularly challenging problem to the Silica remains one of the most common and problematic components in cane sugar juice evaporator scale. The relationship between silica concentration in clear juice and its precipitation in the evaporator train is considered. Methods of reducing silica levels in clear juice through changes in the extraction conditions are investigated thr...

This paper presents results of a parametric study performed on an automotive air-conditioning (AAC) system of a passenger car. The goals are to assess the effects of varying the volumetric flow rate of supply air, number of occupants, vehicle speed, and the fractional ventilation air intake (XOA), on the dry-bulb temperature and specific humidity of the air inside the passenger’s cabin, and on ...

This paper presents a novel approach for experimentally simulating various environmental conditions and container parameters on air conditioning and refrigeration (AC&R) systems. The proposed emulation technique uses a hardware-in-the-loop (HIL) system to simulate the loading conditions on the evaporator during experimental testing. The evaporator air inlet conditions are controlled with a smal...

This paper deals with the investigation of substitutes for R-22 and their heat transfer behaviour in a plate-type evaporator with a falling water film as heat source. Alternatives investigated were R-134a and two new refrigerant mixtures. Measurements on a 3m x 0,5m plate showed a superior performance ofR-134a compared to R-22 and mixtures at equal test conditions and a distinct difference betw...

This study investigated experimentally and theoretically, how condensate and initial formation of a thin frost layer on the surface of the evaporator affects the evaporator performance of room air-conditioners compared to dry coil conditions. The theoretically obtained results were validated with the measured values in both wet and initial frost formation conditions and a good correlation was f...

Given the rapid progress in the electronics industry, the thermal management of electronics components becomes an important and serious issue. Natural and forced cooling are often deficient. One possibility for heat dissipation for high heat flux is using loop heat pipe. A loop heat pipe (LHP) is a two-phase device with extremely high effective thermal conductivity that utilizes pressure differ...