Clouds usually cause invalid observations for sensors aboard satellites, which corrupts the spatio-temporal continuity of land surface parameters retrieved from remote sensing data (e.g., MODerate Resolution Imaging Spectroradiometer (MODIS) data) and prevents the fusing of multi-source remote sensing data in the field of quantitative remote sensing. Based on the requirements of spatio-temporal...

The effective reflectance of the foam on the ocean surface together with the fraction of the surface covered with foam describes the optical influence of whitecaps in the solar spectral range. This effective reflectance is found to be -22% in the visible spectral range and is presented as a function of wavelength for the solar spectral range. With the fraction of the surface covered with foam, ...

The spectral specular reflectance of conventional and novel reflective materials for solar concentrators is measured with an acceptance angle of 17.5 mrad over the wavelength range 300-2500 nm at incidence angles 15-60° using a spectroscopic goniometry system. The same experimental setup is used to determine the spectral narrow-angle transmittance of semi-transparent materials for solar collect...

For instruments that carry onboard solar diffusers to orbit, such as the Sea-Viewing Wide Field-of-View Sensor (SeaWiFS), it is possible to convert the instrument's reflectance measurements to radiance measurements by knowledge of the solar irradiance. This process, which generally requires the application of a solar irradiance model, is described. The application of the irradiance model is sep...

Assessment of nitrogen content from crop leaves has been of interest worldwide to help growers adjust N fertilizer rates to meet the demands of the crop. A multi-spectral imaging system was developed for in-field real-time assessment of plant nitrogen stress in corn (Zea mays L.) crops indicated by plant reflectance and measured using a vision-based multi-spectral imaging sensor (MSIS). The obj...

The paper describes reflectance analysis of real images taken in an outdoor environment. In the past, the fundamental difficulties involved in analyzing outdoor images have prevented the use of traditional techniques for reflectance analysis such as shape from shading and photometric stereo. Those difficulties include: 1. multiple reflection components due to two light sources of different spec...

new selective coating materials are developed and used in advanced solar collector and absorber designs with improved efficiency. cobalt and copper sulfides nanoparticles are high interest for absorbers of solar thermal collectors due to their optical properties and high absorptance in the solar wavelength range (> 96%). in the present work, cobalt and copper sulfides nanoparticles were synthes...

on September 19 2007, CBERS02B, the third land resource satellite jointly developed by China and Brazil was successfully launched with three payloads on it, one of which is CCD camera. Calibration of CCD is a precursor for its quantitative application because there wasn’t onboard calibrator for CCD. Then a comprehensive vicarious calibration and validation experiment of CCD was performed at Gon...

Reflected skylight in above-water measurements of diffuse marine reflectance can be reduced substantially by viewing the surface through an analyzer transmitting the vertically polarized component of incident radiance. For maximum reduction of effects, radiometric measurements should be made at a viewing zenith angle of approximately 45 degrees (near the Brewster angle) and a relative azimuth a...

How does snow’s anisotropic directional reflectance affect the mapping of snow properties from imaging spectrometer data? This sensitivity study applies two spectroscopy models to synthetic images of the spectral hemispherical–directional reflectance factor (HDRF) with prescribed snow-covered area and snow grain size. The MEMSCAG model determines both sub-pixel snow-covered area and the grain s...