Abstract:In this study, an effort has been made to determine the influence of rotational speed of tool on themicrostructure and hardness values of friction stir welded 2024-T851 aluminum alloy. The microstructure of stir zonein the joints has been investigated. It was found that the particles such as Al6(CuFeMn) particles are broken up duringfriction stir welding, and the degree of break up of ...

In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

The axial force measurement plays important role in tool designing and identification of its restrictions. Also, it is vital in design of machine mechanism and optimization of welding process parameters. In this study, a friction stir welded butt join on AA7075-T651 aluminum alloy plate is investigated. With change of some parameters, factors including axial force, mechanical properties, microh...

in this paper, hardness and tensile properties of welded zone of aluminum 1100 alloys by friction stir welding process was investigated and the effects of rotational and traverse speeds of tool on these parameters was studied. also the fracture cross-section of welded samples was investigated. according the results of this paper, the hardness of weld material is higher than base material and is...

in this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the sic abrasive slurry and al2o3, use of diamond paste as abrasive tool) in magnetic abrasive finishing process using designing of experiments on the external surface of cylindrical work pieces of stainless steel aisi 440c to get minimum surface roughness has been...