Although liquid products derived from the pyrolysis of biomass are promising for production petroleum-like hydrocarbon fuels, catalytic burden hydrodeoxygenation must be reduced to achieve feasible upgrading processes. Herein, mild hydrotreating an acid-rich oil (bio-oil) with unusually high total acid number (588 mg KOH/g bio-oil) was performed stabilize low-quality bio-oil. Ru-added TiO2-supp...

A simple, robust and versatile hydrothermal synthesis route to in situ functionalized TiO2 nanoparticles was developed using titanium(IV) isopropoxide as Ti-precursor and selected silane coupling agents (3-aminopropyltriethoxysilane (APTES), 3-(2-aminoethylamino)propyldimethoxymethylsilane (AEAPS), and n-decyltriethoxysilane (DTES)). Spherical nanoparticles (ca. 9 nm) with narrow size distribut...

TiO2 composites with zeolite templated carbon (TiO2-ZTC) and activated carbon (TiO2-AC) were prepared and used as the photocatalysts for comparative studies with pure TiO2. TiO2-ZTC exhibited the highest rate of methylene blue degradation with a rate approximately 4 and 400 times higher than those of TiO2-AC and pure TiO2, respectively. Moreover, the highest catalytic performance of TiO2-ZTC in...

Nanocomposites based on TiO2-supported copper nanoparticles were prepared by a hydrothermal method where copper nanoparticles with or without the passivation of 1-decyne were chemically grown onto TiO2 nanocolloid surfaces (and hence denoted as CuHC10/TiO2 and Cu/TiO2, respectively). Transmission electron microscopy measurements showed that the size of the hybrid nanoparticles was 5-15 nm in di...

More effective techniques are required to mineralize the increasing number of recalcitrant organic contaminants at low concentrations in the water environment using advanced oxidation process. Though relatively new, photocatalytic ozonation (O3/UV/TiO2) is considered superior to ozonation (O3) and photocatalysis (UV/TiO2), due to synergistic effects and use of immobilized TiO2 photocatalysts is...

Platinum-ion-doped TiO2 (Pt(ion)-TiO2) was synthesized by a sol-gel method, and its visible light photocatalytic activities were successfully demonstrated for the oxidative and reductive degradation of chlorinated organic compounds. Pt(ion)-TiO2 exhibited a yellow-brown color, and its band gap was lower than that of undoped TiO2 by about 0.2 eV. The flat band potential of Pt(ion)-TiO2 was posit...

We have chemically polymerized pyrrole in the presence of Sn-doped TiO2 nanoparticles (NPs) and TiO2 (NPs) which act as a protective pigment. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) results show a core–shell structure of pigments in which TiO2 and Sn-doped TiO2 NPs have a nucleus effect and caused a homogenous PPy core–shell type morphology...

This study involves the investigation of altering the photocatalytic activity of TiO2 using composite materials. Three different forms of modified TiO2, namely, TiO2/activated carbon (AC), TiO2/carbon (C), and TiO2/PANi, were compared. The TiO2/carbon composite was obtained by pyrolysis of TiO2/PANi prepared by in situ polymerization method, while the TiO2/activated carbon (TiO2/AC) was obtaine...

Cellulose/TiO2 hybrid spherical microbeads were prepared by a one-step phase separation method using a cellulose xanthate aqueous solution and a sodium polyacrylate aqueous solution. Various types of cellulose/ TiO2 hybrid spherical microbeads were obtained by using the several kinds of TiO2 particles. The resulting hybrid spherical microbeads showed respective differences in the distribution o...

The AgBr loaded TiO2 catalyst was prepared by a feasible approach with AgBr and tetraisopropyl orthotitanate and characterized by BET surface area measurement, diffuse reflectance spectra (DRS), scanning electron microscope (SEM), energy dispersive spectra (EDS), X-ray diffraction (XRD), transmission electron microscope (TEM) and atomic force microscope (AFM) analysis. The results of characteri...