In this work new transparent conductive films that had a sandwich structure composed of ITO/metal/ITO multilayer films were prepared by reactive thermal evaporation technique on glass substrates without intentional substrate heating. Ag, Au and Cu thin films have been used as intermediate metal layer. The thickness of each layer in the ITO/metal/ITO films was kept constant at 50nm/10nm/40nm. Th...

The surface and layer state of thin ion-beam-irradiated Au–Al layers was investigated with scanning high-energy ion microscopy (SHEIM), RBS and SEM. The thin metal layers (90 nm Au top layer and 200 nm A layer deposited on polished glassy carbon) were produced by evaporation and subsequently irradiated with 2.0 MeV 4He‘ ions (ion current 300 nA; beam spot diameter 0.5 mm) to initiated the Au–Al...

a thin-layer chromatography method has been developed and evaluated for the separation and determination of lysine and methonine in a mixture of amino acids obtained from acid or enzyme hydrolysis of protein. the solvent systems were (a) ethanol-ether, (b) phenol-water, (c) ethyl methyl ketone-pyridine-distilled water-glacial acetic acid. procedures in all the three stages were in the same dime...

A bulk acoustic mode micro-electro-mechanical dual resonator platform is utilised to study the evaporation of sub-microliter water droplets from the surface of the resonator. An analytical formulation for the observed frequency shift and the measure dependence of resonant frequency on the modes of evaporation which is consistent with the optically derived data. The resonators access only a thin...

We report the fabrication of large area, thin asymmetric free-standing two-dimensional (2-D) photonic crystals. We fabricate large area 2-D close-packed monodisperse polystyrene (PS) particle monolayers at air/water interfaces by using our needle tip flow method. We then layer tetraethyl orthosilicate (TEOS) onto the 2-D array to form a thin TEOS layer on the 2-D particle array on water. The he...

Evaporation from a meniscus of heptane liquid in a V-groove geometry is experimentally investigated. A thin layer of titanium coated on the backside of the fused quartz groove is electrically heated to provide a constant heat flux. The temperature profile in the evaporating thin film region of the extended meniscus is measured using high-resolution infrared thermography and the temperature supp...

in this assay, the evaluation of lipophilicity of four ace-inhibitors and hydrochlorothiazide (hctz) with rp-tlc on cellulose layers was described using three binary solvent systems. the selected ace inhibitors had sufficiently different structures which can indicate the method suitability for their lipophilicity evaluation as the model substances in comparison with hctz. in addition, the linea...

many research studies have been performed on forced convection (active) solar dryers for fruit and vegetables. a short survey of these showed that applying the forced convection solar dryer not only significantly reduced the drying time but also resulted in many improvements in the quality of the dried products. active indirect and mixed-mode thin layer solar drying experiments were conducted o...

In this work, we report a physical deposition based, compact (cp) layer synthesis for planar heterojunction perovskite solar cells. Typical solution-based synthesis of cp layer for perovskite solar cells involves low-quality of thin films, high-temperature annealing, non-flexible devices, limitation of large-scale production and that the effects of the cp layer on carrier transport have not bee...