An industrial ceramic thermal-barrier coating designated PWA 266, processed by electron-beam physical-vapor deposition, was measured using a steady-state thermal conductivity technique. The thermal conductivity of the mass fraction 7 % yttria-stabilized zirconia coating was measured from 100 °C to 900 °C. Measurements on three thicknesses of coatings, 170 μm, 350 μm, and 510 μm resulted in ther...

Samples of surimi were prepared in laboratory conditions from Adriatic pilchard (Sardina pilchardus). Water content in surimi was 81.5% before mixing with NaCl and κ-carrageenan, which were added in the range of mass fraction from 0 to 10%. Relative apparent specific enthalpy !, initial freezing point Ti, density ρ, and thermal conductivity k of surimi in the temperature range from -25 C to 10 ...

Thermal modeling of an automotive cabin was performed in this paper to predict the inside cabin air temperature. To implement this task, thermal and ventilation loads were estimated and the mass and energy balance conservation equations for dry air and water vapor with considering a new parameter (air circulation ratio) as well as the balance equations of internal components of a cabin were de...

Shoulder geometry of tool plays an important role in friction-stir welding because it controls thermal interactions and heat generation. This work is proposed and developed a coupled rigid-viscoplastic numerical modeling based on computational fluid dynamics and finite element calculations aiming to understand these interactions. Model solves mass conservation, momentum, and energy equations in...

paper undertakes software based numerical simulations in two different traditional houses in cold-dry climate of tabriz and hot-arid climate of yazd, the eco test software chosen for bim simulations. case study on real houses instead of hypothetical models can give more tangible results and choosing traditional houses can provide a good opportunity to compare both physical and thermal condition...

one of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. the present study experimentally investigated the effect of sio2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. the conical solar collector with 1 m2 area and normal to the earth was tested in ahvaz, a city in th...

in recent years, impinging streams have received increasing interest for their high efficiency in heat and mass transfer. this numerical study was conducted to investigate flow and heat transfer characteristics of one-way opposing jets of non-newtonian fluids. effects of reynolds number impinging angle, momentum ratio and flow behavior index on mixing index were evaluated. the results showed im...