Based on the above studies, following conclusions can be made: The introduction of hydraulic additives into Portland cements increases their sulfate resistance, especially when have higher C 3 A content. Cements with 30% tuffite give better strength than those 20% tuffite. least aggressive for pozzolanic are 5% Na2SO 4 solution, most is 3% MgSO in which were more resistant pure cements, agreeme...

The use of pozzolanic waste materials as partial cement replacement is customary in contemporary concretes from a sustainability perspective. In this experimental study, the liquid crystal display (LCD) glass was finely ground to be used SCM, and potential beneficial effects terms strength, hydration, durability resulting were evaluated. Concretes with 10% 20% by LCD powder (LCDGP) developed su...

This study investigated compressive strength, chloride penetration, and freeze-thaw resistance of multiwalled carbon nanotube (MWNT) concrete. More than 100 cylindrical specimens were used to assess test variables during sensitivity observations, including water-cement ratios (0.75, 0.5, and 0.4) and exposure to chemical agents (including gum arabic, propanol, ethanol, sodium polyacrylate, meth...

annually, a lot of imported heat insulator concretes, are used for which a considerable amount of exchange expenses are allocated. most kinds of these insulator concretes are imported during foundation and installation of the factories accompanied by primary facilities and supplies. even, after a short time the factories began to work, whenever the walls of the insulators are required to be cha...

Unwanted sound reflection can create acoustic discomfort and lead to problems of speech comprehensibility. Contemporary building techniques enable highly finished internal walls resulting in sound reflective surfaces. In contrast, sustainable construction materials using natural and vegetal materials, are often more porous and absorptive. Hemp shiv is used as an aggregate and when mixed with li...

Abstract—In this study, the Compressive strength of concretes made with Ground Granulated Blast furnace Slag (GGBS), Pulverised Fuel Ash (PFA), Rice Husk Ash (RHA) and Waste Glass Powder (WGP) after they were exposed 780C (exposure duration of around 60 minutes) and then allowed to cool down gradually in the furnace for about 280 minutes at water binder ratio of 0.50 was investigated. GGBS, PFA...

In the field of construction, sustainable building materials are currently undergoing a process of technological development. This study aims to contribute to understanding the behavior of the fundamental properties of concretes prepared with recycled coarse aggregates that incorporate a polyethylene terephthalate (PET)-based additive in their matrix (produced by synthesis and glycolysis of rec...

Fiber reinforced concretes (FRCs) exhibit property improvement caused by the fibers. By using gamma radiation we have further improved mechanical properties of hydraulic concretes elaborated with Portland cement, water, silica sand, marble and polypropylene (PP) fibers. Compression strength, compression modulus, impact strength and dynamic elastic modulus were determined. Impact fatigue testing...

This study examined the properties of fresh and hardened concretes as influenced by the moisture state of the coarse recycled concrete aggregates (RCA) after surface treatment. Surface treatment was performed by immersing the coarse RCA in a calcium metasilicate (CM) solution. The treated coarse RCA was maintained in three controlled moisture states, namely, air-dried, oven-dried, and saturated...