In the current research, a three-dimensional finite element model was considered to predict the mechanical behavior of Single Wall (SWCNTs) and Multi Wall Carbon Nanotubes (MWCNTs). Assuming the nonlinear elastic behavior of C-C bond in large strains, hyperelastic models were considered. Literature review revealed that the material parameters of the hyperelastic models have been determined from...

Cyclic stress strain curves (CSSC) response of Al-2024 Annealed condition was conducted under symmetric tension-compression at room temperature and constant frequency, using a servo-hydraulic testing machine, to study the effect of cooling rate on cyclic stress strain curves (CSSC) response. The fatigue response of Al-2024 alloy was evaluated macroscopically in terms of cyclic stress strain res...

To investigate the hot deformation behavior of 17-7 PH stainless steel, hot compression tests were carried out at the temperatures of 950, 1050 and 1150 oC and strain rates of 0.001 s-1 to 0.1 s-1. Accordingly, the hot working behavior was studied by the analyses of flow stress curves, work hardening rate versus stress curves, exponent- type constitutive equations and deformed microstructures. ...

many efforts have been made to model the the hot deformation (dynamic recrystallization) flow curves of different materials. phenomenological constitutive models, physical-based constitutive models and artificial neural network (ann) models are the main methods used for this purpose. however, there is no report on the modeling of warm deformation (dynamic spheroidization) flow curves of any kin...

some numerical and experimental investigations are made on the performance of five different hyperelastic constitutive models (second order polynomial, yeoh, arruda-boyce, ogden and marlow) in tension and compressionmodes. first, the results of the tensile and compression tests on a rubber sample were used to determine the parameters of the models by curve fitting methods. next, by using an alg...

Dynamic recrystallization, DRX, behaviour of a precipitation hardened, PH, stainless steel was studied in connection with microstructural developments in a compression test. The experimental results showed that the dominant mechanism of softening is DRX, but at high strain rates and low temperatures, ie, high Zener-Holman parameter, Z, work hardening and dynamic recovery, DRV, produced a pancke...

to investigate the hot deformation behavior of 17-7 ph stainless steel, hot compression tests were carried out at the temperatures of 950, 1050 and 1150 oc and strain rates of 0.001 s-1 to 0.1 s-1. accordingly, the hot working behavior was studied by the analyses of flow stress curves, work hardening rate versus stress curves, exponent- type constitutive equations and deformed microstructures. ...

dynamic recrystallization, drx, behaviour of a precipitation hardened, ph, stainless steel was studied in connection with microstructural developments in a compression test. the experimental results showed that the dominant mechanism of softening is drx, but at high strain rates and low temperatures, ie, high zener-holman parameter, z, work hardening and dynamic recovery, drv, produced a pancke...

Many efforts have been made to model the the hot deformation (dynamic recrystallization) flow curves of different materials. Phenomenological constitutive models, physical-based constitutive models and artificial neural network (ANN) models are the main methods used for this purpose. However, there is no report on the modeling of warm deformation (dynamic spheroidization) flow curves of any kin...