The behavior of the slag layer between the oscillating mold wall, the slag rim, the slag/liquid steel interface, and the solidifying steel shell, is of immense importance for the surface quality of continuous-cast steel. A computational model of the meniscus region has been developed, that includes transient heat transfer, multi-phase fluid flow, solidification of the slag, and movement of the ...

Submit Manuscript | http://medcraveonline.com rate of about 125 kg/t of the steel produced which leads to piling of the slag in the plant. This slag is generally recycled in a waste recycling plant (WRP) so as to separate the magnetic and the nonmagnetic portions by means of mechanical crushing and magnetic separation. The magnetic portion is then recycled and used in the primary steel making p...

Multi-faceted experiments were conducted to measure the properties of several mold slags, needed for fundamental characterization of heat transfer and friction in the interfacial gap between the shell and mold during the continuous casting of steel. A novel apparatus was used to measure the friction coefficient between solidified mold flux and copper at elevated temperatures. The measured softe...

Mold powders are fluxing agents used as raw materials in the steel industry, which play very important role in processing stability and final surface quality of a product. Surface quality depends particularly on the viscosity and the heat transfer of infiltrated mold flux between the mold wall and the solidified steel shell. Heat flux across the interfacial gap depends on thermal properties of ...

To get suitable ladle slag which can avoid slag sticking onto the RH immersion tube during RH refining process of IF steel, the effect of composition on melting point and viscosity of RH refining ladle slag was studied by different additives which is based on CaO. The results of melting point and viscosity testing experiments indicates that, the melting point and viscosity of RH refining ladle ...

Amorphous silica and alumina of metakaolin are used to adjust the bulk composition of black (BSS) and white (WSS) steel slag to prepare alkali-activated (AAS) mortars consolidated at room temperature. The mix-design also includes also the addition of semi-crystalline matrix of river sand to the metakaolin/steel powders. The results showed that high strength of the steel slag/metakaolin mortars ...

A new process route for the valorization of BOF steel slags combining H2 production and CO2 mineral sequestration is investigated at 300°C (HT) under hydrothermal conditions. A BOF steel slag stored several weeks outdoor on the production site was used as starting material. To serve as a reference, room temperature (RT) carbonation of the same BOF steel slag has been monitored with in situ Rama...

Slags are the final solid wastes from the steel industry. Their production from waste and associated materials is a proper implementation of the basic objectives and principles of the waste management. This study aims to investigate the chemical and selected significant geotechnical parameters of steel slag as the alternative materials used in road construction. These investigations are strongl...

Properties of TiO2 powder got hydrometallurgically from the slag that was, together with pig iron, a product of reductional red mud electromelting were investigated using physico-chemical methods of analyzing. The samples of TiO2 powder contain high quantity of titanium compared with the used raw material granulated slag. Investigating the mophology of the powder samples, it has been found out ...