In this paper, a novel kind of method to monitor corrosion expansion of steel rebars in steel reinforced concrete structures named fiber optic coil winding method is proposed, discussed and tested. It is based on the fiber optical Brillouin sensing technique. Firstly, a strain calibration experiment is designed and conducted to obtain the strain coefficient of single mode fiber optics. Results ...

ball mills are common grinding equipment in mineral processing industries. ball wear results from three mechanisms namely impact, abrasion and corrosion. of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. therefore, the aims of this research were to investigate the grinding chemistry influence (slurry ph, solid percentage, water chemistry an...

Glass cell experiments were conducted to investigate the mechanism and kinetics of mild steel corrosion in H2S environments which is accompanied by iron sulfide scale formation. By using the weight change method, the rates of corrosion and scale formation were found. It was also concluded that mackinawite is the predominant type of iron sulfide that formed on the steel surface under the test co...

A corrosion-inhibiting mixture of compounds has been developed for addition to the water used to rinse metal parts that have been cleaned with aqueous solutions in preparation for adhesive bonding of the metals to rubber and rubberlike materials. Prior to the development of this corrosion inhibitor, the parts (made, variously, of D6AC steel and 7075-T73 aluminum) were rinsed by deionized water,...

The life of a concrete bridge exposed to deicing salt or seawater has often been limited by corrosion of the steel reinforcement. The service life of a concrete structure, degraded by corrosion, is considered to be the sum of the initiation and propagation periods. The initiation phase is the time required for sufficient accumulation of aggressive species at the rebar surface to initiate corros...

CHARACTERIZATION AND CORROSION OF BCC-TANTALUM COATING DEPOSITED ON ALUMINUM AND STEEL SUBSTRATE BY DC MAGNETRON SPUTTERING by Chirag Joshi Tantalum is one of the most versatile highly refractory corrosion-resistant metals. Tantalum coating can be used as an effective corrosion barrier if it is continuous, free from defects and it adheres well to the substrate. A DC magnetron sputtering techniq...

The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

Abstract—Corrosion inhibitors are widely used in concrete industry to reduce the corrosion rate of steel rebar which is present in contact with aggressive environments. The present work aims to using Zamzam water from well located within the Masjid al-Haram in Mecca, Saudi Arabia 20 m (66 ft) east of the Kaaba, the holiest place in Islam as corrosion inhibitor for steel in rain water and simula...

Calcium acetate, which can be used in concrete to shorten the construction period and to improve productivity, was manufactured using limestone sludge and acetic acid. Calcium acetate contains a carboxyl group, and it can provide anticorrosive properties by forming a complex with the steel surface. We evaluated the basic performance of a carboxylic early-strength agent produced from industrial ...

FOREWORD Salt-induced reinforcing steel corrosion in concrete bridges has undoubtedly become a considerable economic burden to many State and local transportation agencies. Since the iron in the steel has a natural tendency to revert eventually to its most stable oxide state, this problem will, unfortunately, still be with us, but to a much lesser degree due to the use of various corrosion prot...