this paper presents an overview of model updating and particularly its application for updating of frame model. in this article a mathematical model of the frame was produced with finite element method. the frame was subjected to hammer modal testing. then the results of the modal testing were compared with those predicted with the model. this comparison revealed discrepancies between these two...

the purpose of this study is to compare the results of different probabilistic methods such as the perturbation method, stochastic finite element method (sfem) and monte carlo method. these methods were used to study the convergence of direct approach for slope stability analysis and are developed for a linear soil behavior. in this study, two dimensional random fields are used and both the fir...

needle insertion is a minimally invasive technique in diagnosing and treating tumors. however, to perform a surgery accurately, the tissue should have minimum amount of displacement during needle insertion so that it reaches the target tissue. therefore, the tissue membrane has to move less to decrease rupturing under the membrane. in this study, the effect of different design parameters on dis...

  In this article, vibration analysis of an Euler-Bernoulli beam resting on a Pasternak-type foundation is studied. The governing equation is solved by using a spectral finite element model (SFEM). The solution involves calculating wave and time responses of the beam. The Fast Fourier Transform function is used for temporal discretization of the governing partial differential equation into a se...

the welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). a lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. in order to establish the fatigu...

some numerical and experimental investigations are made on the performance of five different hyperelastic constitutive models (second order polynomial, yeoh, arruda-boyce, ogden and marlow) in tension and compressionmodes. first, the results of the tensile and compression tests on a rubber sample were used to determine the parameters of the models by curve fitting methods. next, by using an alg...

in this paper the critical strain energy release rate for t300/913 carbon-epoxy laminated composites has been studied using ansys finite element software based on virtual crack closure technique ( vcct ). compact tension ( ct ) specimen has been used for numerical analyses and the geometrical dimensions have been extracted from the existing references. the results obtained from the finite eleme...

The non-hydrostatic (NH) compressible Euler equations of dry atmosphere are solved in a simplified two dimensional (2-D) slice framework employing a spectral element method (SEM) for the horizontal discretization and a finite difference method (FDM) for the vertical discretization. The SEM uses high-order nodal basis functions asso-5 ciated with Lagrange polynomials based on Gauss–Lobatto–Legen...