For a solar thermal system, increasing the heat transfer area can increase the output temperature of the system. However, this approach leads to a bigger and bulkier collector. It will then increase the cost and energy needed to manufacture the solar collector. This study is carried out to estimate the potential to design a smaller solar collector that can produce the same desired output temper...

The possibility of using flat plate collector in northern parts of Iran specially city of Rasht has been investigated in this paper. According to the high humidity in the northern parts of this country, diffuse radiation plays a more important role than direct radiation. This fact can change the results of delivered solar energy and the best tilt angle of the collector compared to the sunny cen...

In the present work the efficiency of a solar parabolic trough has been investigated experimentality. parabolic trough solar collector constitute a proven source of thermal energy for industrial process heat and power genaration. The impact of  using the partially porous media in the absorber on the efficiency of PTC (parabolic trough collector) has been investigated. The porosity of copper foa...

A solar-driven Stirling engine is modelled as a combined system which consists of a solar collector and a Stirling engine. The performance of the system is investigated, based on the linearized heat loss model of the solar collector and the irreverisible cycle model of the Stirling engine affected by finite-rate heat transfer and regenerative losses. The maximum efficiency of the system and the...

As the fossil fuels are depleting continuously, we know that solar energy harvesting is a significant potential area for new research dimensions. Sun provides us about 1.9 x 10 8 TWh/yr on the land, of which 1.3 x 10 5 TWh]/yr energy is used. In order to make much use of solar energy on the earth, solar energy harvesting into more usable form (e.g. heat or electricity) by using solar energy col...

outdoor experiments on a once-through single glazed solar air heater with perforated metal absorber plate were conducted to determine the practical effect of absorber plate porosity as well as suction air flow rate on the collector thermal efficiency and its total pressure drop. three aluminum absorber plates were made perforated by drilling circular holes with different diameter/pitch ratios i...

A solar absorption icemaker was designed. It is an intermittent system and uses Calcium Chloride and Ammonia as absorbent and refrigerant respectively. The single glazed collector/absorber/generator unit uses a plane glass sheet as the outer cover. Overall collector plate exposed area is 1.0m. A thermodynamic simulation of the icemaker has been performed in order to investigate the effect that ...

drying of agricultural products is a sophisticated process with high energy consumption. energy needed for sustainable development, is one of the biggest challenges facing humanity. the performance of a heat recovery assisted solar dryer was evaluated in this study. drying time, collector efficiency, energy consumption, solar fraction and energy recovery fraction were investigated at different ...