Two geometrically nonlinear plate theories, based either on firstor third-order transverse shear deformation theory are used for finite element modeling and simulation of the transient response of smart structures incorporating piezoelectric layers. In particular the time histories of nonlinear vibrations and sensor voltage output of a thin beam with a piezoelectric patch bonded to the surface ...

The purpose of this work is to control the vibration of the plate with the help of finite element method. Using augmented equations, a finite element model of a two-dimensional cantilever plate instrumented with a piezoelectric patches sensor-actuator pair is derived. The contribution of piezoelectric sensor and actuator layers on the mass and stiffness of the plate is considered. As mesh size ...

The main objective of this study is to reduce optimal vibration suppression of Timoshenko beam under non-periodic step and impulse inputs. Cantilever beam was modeled by Timoshenko theory and finite element numerical method. Stiffness (K), mass (M), and damping (C) matrices are extracted. Then, in order to control structure vibration, piezoelectric patches were used due to simultaneous dual beh...

This paper is concerned with active vibration reduction of a square isotropic plate, mounted rigidly along one edge to form a cantilever. Optimal placement of ten piezoelectric sensor/actuator pairs is investigated using a genetic algorithm to suppress the first six modes of vibration. A new objective function is developed based on modified Hinfinity to locate the sensor/actuator pairs. The pla...

The tracking control accuracy of the piezoelectric actuator (PEA) is limited due to its inherent hysteresis nonlinearity. A new piezoelectric-actuator model is synthesized based on two first-order transfer systems in parallel with two tuned parameters determined from one experiment. Two open-loop tracking controllers are implemented with the proposed model to compensate the hysteresis of linear...

A new multi-objective topology optimization method is proposed in this study for systematic design of multi-phase piezoelectric actuators. The actuator under consideration is composed of a compliant host structure equipped with piezoelectric elements, where the host structure serves as a compliant amplifier to enlarge the small stroke output generated by the actuation force of piezoelectric mat...

Elastic waves, especially guided waves, generated by a piezoelectric actuator/sensor network, have shown great potential for on-line health monitoring of advanced aerospace, nuclear, and automotive structures in recent decades. Piezoelectric materials can function as both actuators and sensors in these applications due to wide bandwidth, quick response and low costs. One of the most fundamental...

Abaqus/Standard simulation of Lamb waves in smart composite plates is investigated for detecting delamination type damage. Composite plates typical of aerospace structures are used and a PZT actuator is surface bonded to excite Lamb waves. Abaqus model of composite plate uses layered solid elements. Piezoelectric (PZT-5H) actuator is modeled using piezoelectric elements that have both displacem...

This paper reports a self powered smart sensor node (also called ‘smart tag’) consisting of a piezoelectric vibration energy harvester, a power conditioning circuit, sensors and an RF transmitter. The smart tag has dimensions similar to a credit card and can be easily integrated into various applications such as the ibration energy harvesting iezoelectric generator elf-powered ireless sensor no...

a solution to the problem of identification and control of smart structures is presented in this paper. smart structures with build-in sensors and actuators can actively and adaptively change their physical geometry and properties. as a particular example, a representative dynamic model of a typical fighter vertical tail, identified as the smart fin, is considered. piezoelectric patches, which ...