In this study, the effect of the tube material on the thermal stress generated in a vertical shell and tube heat exchanger is investigated. Shell and tube heat exchangers are the most common heat exchangers used in industries. One of the most common failures in these exchangers in the industry is the tube failure at the junction of the tube to tubesheet. When the shell side and the tube side fl...

Heat exchanger is a universal process equipment, which widely used in chemical industry, oil refining, thermal power and other industries. Shell-and-tube heat exchangers often fail prematurely due to flow-induced vibration. In this paper, aiming at the problem of severe vibration shell-and-tube an enterprise, acceleration sensors are measure shell tube side exchanger. Through analysis measureme...

abstract: in this study, al 2 o 3 /eg and tio 2 /eg nanofluids as coolants have been used in the double-tube heat exchanger. the hot solvent inlet heat exchanger must be cooled down with a specified amount. we can use nanofluids as coolants in the heat exchanger for optimization of the heat transfer area. therefore, the efficacy of nanofluids as coolants is verified. furthermore, flow rate of c...

A multi-tube, spirally-wound, cryogenic heat exchanger, the main heat exchanger (MHE) is the principal piece of heat-transfer equipment in mixed-refrigerant liquefaction cycles for producing liquefied natural gas (LNG). An MHE unit operation model called the spirally-wound tube-bundle module was developed as an integral component of the dynamic simulation capabilities for a process modeling pac...

A software for the thermal and hydraulic design of shell and tube heat exchangers with flowinduced vibration checks has been developed in a Windows-based Delphi programming environment. Its user-friendly input format and excellent colour graphics features make it an excellent tool for the teaching, learning and preliminary design of shell and tube heat exchangers. Design methodology is based on...

Single staggered is a design development of normal wire and tube heat exchanger that wires are welded with staggered configuration on two sides. Capacity of wire and tube heat exchanger is the ability of the heat exchanger to release heat. The objective of this study is to analyse the effect of wire pitch (pw) on capacity of single staggered wire and tube heat exchanger. The research...

the effect of γ-al2o3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-al2o3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. since the properties of γ-al2o3-water nanofluids were variable, they were ...

In this paper an algorithm of PID controller based on model predictive control is designed for a shell and tube heat exchanger. PID controllers and model predictive controls are two control algorithm mostly used these types of process applications. The three parameters of PID controller must be tuned to the process to obtain a satisfactory closed loop process performance. The model of the heat ...

Over 85% of all new heat exchanger applications in oil refining, chemical, petro-chemical, and power generation are accommodated through the use of conventional shell and tube type heat exchangers. The fundamental basis for this statistic is shell and tube technology is a cost effective, proven solution for a wide variety of heat transfer requirements. However, there are limitations associated ...

heat exchangers are the critical components of refrigeration and liquefaction processes. selection of appropriate operational conditions for cryogenic recuperative heat exchanger and expansion valve operating in joule-thomson cooling system results in improving the performance and efficiency. in the current study, a straightforward procedure is introduced to design an efficient joule-thomson co...