We study the rheology of a two-fluid emulsion in semiconcentrated conditions; solute is Newtonian while solvent an inelastic power-law fluid. The problem at hand tackled by means direct numerical simulations using volume fluid method. analysis performed for different fractions and viscosity ratios under assumption negligible inertia zero buoyancy force. Several carrier fluids are considered enc...

Dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. These walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. In this research intermediate dual system of steel moment frame was chosen with int...

This study examines the relationship between shear force and horizontal relative displacement of Lshape shear connector by means of beam type test method. An equation for maximum shear force of the specimen which takes into account the effects of size of the shear connector and the concrete strength was proposed. It was found that shear force-horizontal relative displacement relationship can be...

We perform extensive molecular dynamics simulations of two-dimensional frictionless granular materials to determine whether these systems can be characterized by a single static yield shear stress. We consider boundary-driven planar shear at constant volume and either constant shear force or constant shear velocity. Under steady flow conditions, these two ensembles give similar results for the ...

nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. this combination maintains pressure loading capacity and properties in mutual resistant...

seismic piezocone device (scptu) together with resonant column and cyclic triaxial test apparatus are employed to measure small strain shear modulus (g0) of carbonate sandy and clayey soils of southern coasts of iran. a large area of southern regions of iran is formed from clay, silt and sand. in this study, maximum shear modulus that is derived from both field (by seismic piezocone) and labora...

the effects of cementation and the physical properties of grains on the shear behavior of grouted sands are investigated in this paper. the consolidated-undrained triaxial shear behavior of three grouted carbonate sands with different physical properties, including particle size distribution, particle shape and void ratio, was studied. two sands were obtained from the north shores of the persia...

series of undrained monotonic triaxial tests and cone penetration tests were conducted on loose silty sand samples to study correlation between undrained shear strength of silty sands (sus) and piezocone test results. cpt tests were conducted at 27 silty sand samples in calibration chamber. the results indicate that, in low percent of silt (0-30%), as the silt content increases, the undrained s...

Design of shear walls is a complex procedure, especially if the cross section of the shear wall is not regular in shape. Shear walls are usually treated like cantilevers fixed at the foundation level. Normally, lift wells are designed as shear walls. The design of shear walls takes horizontal forces into account by shear and bending. Design for shear in the walls can be managed by computing the...

This paper compares base shear computed from floor accelerations (inertial base shear) and column shears (structural base shear) for several single-degree-of-freedom (SDF) systems and two mid-rise, multi-story buildings due to a suite of 30 earthquake ground motions. The presented results show that the inertial base shear is close to structural base shear in short-period (<1 sec) SDF systems bu...