The design of earthquake-resistant buildings starts with defining the maximum lateral earthquake forces or their resultant. The amount of these forces depends on various factors, including coefficient of system behavior which depends on overstrength and its ductility. In this study, a method is presented for designing an earthquake-resistant system in which the distribution of lateral forces is...

Interaction between a structure under base excitation and heavy non-structural elements that it supports is significant in the seismic analysis and design of the structure. Heavy non-structural elements may slide/rock under base excitation, and this dynamic action affects the seismic behavior of the supporting structure. Hence, in this study, a numerical model was presented to describe the seis...

Due to low stiffness of braces after yielding, the structures with buckling-restrained braces (BRBs) experience high residual drifts during an earthquake, which can be intensified by aftershocks and causes considerable damages to structures. Also, due to poor distribution of stiffness, this problem is exacerbated for irregular structures. Recently, the yielding brace system (YBS) has been intro...

SUMMARY The quality of seismic-to-well tie is commonly quantified using the classical Pearson's correlation coefficient. However the seismic wavelet is time-variant, well logging and upscaling is only approximate, and the correlation coefficient does not follow this nonlinear behavior. We introduce the Dynamic Time Warping (DTW) to automate the tying process, accounting for frequency and time v...

The quality of seismic-to-well tie is commonly quantified using the classical Pearson’s correlation coefficient. However the seismic wavelet is time-variant, well logging and upscaling is only approximate, and the correlation coefficient does not follow this nonlinear behavior. We introduce the Dynamic Time Warping (DTW) to automate the tying process, accounting for frequency and time variance....

Self-centering rocking walls are known as viable alternatives to typical shear walls, as they provide a number of solutions for eliminating seismic flaws of conventional designs. These rocking walls have a generally positive impact on the seismic behavior of structural systems, but their design makes them susceptible to concrete crushing around their base, which can lead to significantly advers...

abstract: the experience of last earthquakes has shown the vulnerability of most of structures. this has been caused the speeding up of the seismic evaluation and retrofitting of projects in iran. in this regard, the instructions for seismic rehabilitation of the existing buildings have been published and are currently beiong used in the evaluation and retrofitting projects. the experience of r...

Yielding elements (YE) are among those devices that not only help control structural damages, but make better seismic behavior by concentrating the frames in some removable part of the structures. YE are located at the intersection of Concentric Braced Frame (CBF) in a rectangular shape. In this paper, Seismic behavior of the frames with YE will be investigated. For this reason, 5 braced steel ...

Response modification factors (R-factor) are used in current seismic building codes to reduce earthquake forces associated with seismic design level to determine force levels. In recent years, many authors have shown great interest in the development of seismic structural systems and several theoretical and experimental studies have been conducted to investigate performance of dampers but littl...

This paper investigates the elastic-plastic seismic behavior of long span cable-stayed steel bridges through the plane finite-element model. Both geometric and material nonlinearities are involved in the analysis. The geometric nonlinearities come from the stay cable sag effect, axial force-bending moment interaction, and large displacements. Material nonlinearity arises when the stiffening ste...