Abstract Background and Aim: One of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. Since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. Considering the diverse composition of avail...

STATEMENT OF PROBLEM Accumulation of plaque and staining due to a rough surface, and penetration of colourant agents from food and beverages in to the resin composite results in an incomplete polymerization. There is a little information on the effect of finishing and polishing techniques on the discoloration of nanohybrid and microhybrid composites when exposed to staining solutions. OBJECTI...

Measurement of the strength of brittle materials, such as resin composites, is extremely difficult. Micro-indentation hardness testing is a convenient way of investigating the mechanical properties of a small volume of material. In this study, the mechanical properties of five commercially available flowable resin composites were investigated by the dynamic micro-indentation method. Additionall...

abstract background and aim: one of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. considering the diverse composition of available ...

The relationships between the transmission coefficient and the cure depth were evaluated on eight commercially available light-activated resin composites. The determination of transmission coefficient was carried out by the use of a radiometer for various shades of the resin composites. The transmission coefficient, ranging from 0.042 to 0.263, wasdependent upon the shade of the resin. There wa...

statement of problem: dental resin composites are becoming prevalent in restorative dentistry and have almost replaced amalgam nowadays. consequently, their mechanical properties and durability are critical. objectives: the aim of this study was to produce pyrex glass nano-particles by wet milling process and use them as reinforcement in dental resins for anterior restorations and then examinat...

The aim of this in vitro study was to evaluate the influence of physicochemical surface properties of resin-based composites on Streptococcus mutans biofilm formation. Specimens were prepared from each of four resin-based composites by polymerization against Mylar strips. Half of the number of specimens received no further surface treatment, whereas the other half were subjected to a polishing ...

The purpose of this study was to evaluate the effect of thermal cycling on the surface texture of restorative materials. Disk-shaped specimens made of seven resin composites (Beautifil: BF; Esthet-X: EX; Filtek Supreme: FS; Inten-S: IS; Point 4: PT; Solare: SR; and Venus: VS) were finished with 1-microm alumina suspension, and then thermocycled between 4 and 60 degrees C in distilled water for ...

blown bitumen (110/10) was mixed with heavy vacuum slops (h.v.s), 60/70 penetration grade bitumen and recycled isotactic polypropylene (ipp) at different levels. the resulting resins were used to impregnate non-woven poly(ethylene terephthalate) fibers to form composites. the modulus and penetration grade of the resulting bituminous resins were determined. it was found that these bituminous res...