This paper describes the passive Qswitch, based on polymer and organic dye BDN, of a pulsed Nd:YAG laser. Pulses of 27ns duration and peak power of 1.7MW for initial transmission of Q-switch 18.4% 0 T = have been obtained. We have obtained Q-switching efficiency of 77% for train of pulses of 31 and 76.2% 0 T = at the pump energy of 98J. We have also obtained the dependency of laser pulse charac...

BACKGROUND Nitric oxide (NO) is currently administered using devices that maintain constant inspired NO concentrations. Alternatively, devices that deliver a pulse of NO during the early phase of inspiration may have use in optimizing NO dosing efficiency and in extending application of NO to long-term use by ambulatory, spontaneously breathing patients. The extent to which the amount of NO del...

The conversion efficiency of an optical parametric oscillator is reduced by energy consumption during build-up of signal and idler intensities and due to back-conversion effects. By tailoring the pump pulse temporal shape, we are able to improve the conversion efficiency by minimizing build-up time and back-conversion. Simulations predict a significant improvement in 1064 nm to 4000 nm idler co...

We report on a Q-switched VCSEL side-pumped 946 nm Nd:YAG laser that produces high average power blue light with high pulse energy after frequency doubling in BBO. The gain medium was water cooled and symmetrically pumped by three 1 kW 808 nm VCSEL pump modules. More than 1 W blue output was achieved at 210 Hz with 4.9 mJ pulse energy and at 340 Hz with 3.2 mJ pulse energy, with 42% and 36% sec...

Multiphoton excitation through optical fibers is limited by pulse broadening caused by self-phase modulation. We show that for short fiber lengths (approximately 2 m) two-photon excitation efficiency at the fiber output can be substantially improved by single-mode propagation in a large-area multimode fiber (10-microm core diameter) instead of a standard 5.5-microm core fiber. Measurements and ...

The acceleration efficiency of a laser driven linear accelerator is analyzed. The laser power, loss factor and impedances determine the maximum charge that can be accelerated and the efficiency of that acceleration. The accelerator structure can be incorporated into a laser cavity. The equation for the resultant laser pulse is derived and analyzed. A specific example is presented, and the stead...

High-conversion-efficiency, high-stability optical parametric chirped-pulse amplification is demonstrated with a spatiotemporally shaped pump laser system. Broadband 5-mJ pulses are produced at a 5-Hz repetition rate with a pump-to-signal conversion efficiency of 29% and energy stability better than 2% rms. To our knowledge this is the highest conversion efficiency and stability achieved in an ...

Green light (2ω) has the potential to drive ignition target for laser fusion with significantly more energy than blue light (3ω) and a relatively higher damage threshold for the optic components in the final optic assembly, but it has issues of a relatively low laser to x-ray conversion efficiency and a hard x-ray spectrum as compared to 3ω. In this paper, we propose to drive a foam hohlraum wa...

in this paper, we present a numerical method for solving nonlinear fredholm and volterra integral equations of the second kind which is based on the use of haar wavelets and collocation method. we use properties of block pulse functions (bpf) for solving volterra integral equation. numerical examples show efficiency of the method.