The aim of this study was to evaluate different curing times of a light-emitting diode (LED) unit on shear bond strength (SBS) of ceramic brackets bonded to feldspathic porcelain. Ceramic brackets were bonded with a light-cured adhesive to 96 feldspathic porcelain facets. Air-borne particle abrasion was performed using 25 mum aluminium trioxide (Al(2)O(3)) with an air abrasion device from a dis...

A preceding study of contact damage in a bilayer system consisting of a porcelain coating on a stiff Pd-alloy substrate is here expanded to investigate the role of substrate modulus and hardness. Bilayers are made by fusing the same dental porcelain onto Co-, Pd-, and Au-alloy metal bases. Indentations are made on the porcelain surfaces using spheres of radii 2.38 and 3.98 mm. Critical loads to...

The bond strength by three point bending strength of two metal substrates (commercially pure titanium or grade II, and Ti-6Al-4V alloy or grade V) combined to three distinct low-fusing ceramic systems (LFC) and the nature of porcelain-metal fracture by scanning electron microscopy (SEM) were evaluated. The results were compared to a combination of palladium-silver (Pd-Ag) alloy and conventional...

To study the effect of different cooling rates after glaze firing on Radius of radial crack, Fracture toughness and Microhardness of Alumina reinforced porcelain. Total 30 porcelain discs reinforced with aluminium oxide of 8mm diameter×0.6mmthickness were prepared. Specimens were divided into three groups, each group containing ten discs. They were positioned at the entrance of the furnace with...

PURPOSE OF THE STUDY It is difficult to achieve a reliable bond between the titanium and veneering porcelain. The aim of this study was to evaluate the bond strength between titanium ceramic crowns. MATERIALS AND METHODS The surfaces of titanium copings were divided in two groups. Group A sandblasted with 250 um (n = 10) and Group B without sandblasting (n = 10). Low-fusing porcelain was bond...

STATEMENT OF PROBLEM The mechanical properties of zirconia suggest that it might serve as a material for abutment crowns for partial removable dental prostheses (RDPs). Only limited clinical evidence is available for the use of ceramics as abutment crowns. PURPOSE The purpose of this retrospective clinical study was to evaluate the outcome of veneered zirconia single crowns in abutment teeth ...

School children often encounter traumatic injuries like a crown fracture. They create serious functional, esthetic and psychological problems. Achievement of promising restoration that preserves its aesthetics and strength is the greatest desire for both children and their parents and is a challenging task for the dentist. The restorative options in these cases usually include composite resin a...

statement of the problem: porcelain may fracture or chip if exposed to any traumas and can be repaired by using a resin composite. purpose: this study was aimed to evaluate the influences of er:yag laser on shear bond strength (sbs) of resin composite to feldspathic porcelain. materials and method: seventy-two porcelain blocks were divided into six groups (n=12): g1: no treatment (control group...

OBJECTIVES The purpose of this study was to evaluate the effect of hot pressing on the shear bond strength of a Au-Pt-Pd alloy-porcelain composite. METHODS Several metal-porcelain composites specimens were produced by two different routes: conventional porcelain fused to metal (PFM) and hot pressing. In the latter case, porcelain was hot pressed onto a polished surface (PPPS) as well as a rou...