This study evaluated the tradeoffs amongst fatigue crack propagation resistance, wear resistance, and oxidative stability in a wide variety of clinically-relevant cross-linked ultra-high molecular weight polyethylene. Highly cross-linked re-melted materials showed good oxidation and wear performance, but diminished fatigue crack propagation resistance. Highly cross-linked annealed materials sho...

The electrical conductivity of pure Cu powder is typically deteriorated at elevated temperatures due to the oxidation by forming non-conducting oxides on surface, while enhancing oxidation resistance via alloying is often accompanied by a drastic decline of electrical conductivity. Obtaining Cu powder with both a high electrical conductivity and a high oxidation resistance represents one of the...

The effect of anodic oxidation of a NiTi shape memory alloy in sulfuric acid electrolyte on its surface characteristics was studied. Surface roughness was measured by roughness tester. Surface morphology was studied using optical microscopy (OM) and scanning electron microscopy (SEM). Corrosion behavior was specified by recording Potentiodynamic polarization cur...

In the present study, electrophoretic deposition (EPD) method in different electric fields (30 – 300 V / cm) was used to apply Co3O4 spinel coating to SUS 430 as SOFC interconnect. The coated and uncoated specimens were pre-sintered in air at 800 and 900 °C for 3 h followed by cyclic oxidation at 700 and 800 °C for 500 h, respectively. X-ray diffraction analysis (XRD), Scanning Electron Microsc...

grate bar is an industrial part which is used in the indurating furnace of an iron ore pelletizing plant. steel part ofthe grate bars are expected to have high resistance to atmospheric oxidation because of its contact with hot gases(up to 920 °c) during the normal operation of the process. in this study, different samples from several sections ofused grate bars with apparent defects were selec...

titanium aluminide and its alloys have been utilized in automotive, aerospace and power industries because of their specific properties such as low density (~ 4 g/cm3), high melting temperature (~ 1460 °c) and excellent high-temperature strength. ti-48al intermetallic compound and its alloys with 1.5, 3 and 5 at.%mn were produced with mechanical alloying of elemental powders for 50 hours. the p...

in order to enhance the performance of interconnects which are used in solid oxide fuel cells (sofcs), a protective/conductive coating can be applied. in this research aisi 430 ferritic stainless steel was coated in a mn-base pack mixture by pack cementation method. in order to evaluate the oxidation behavior, isothermal oxidation was accomplished for 200 h at 800 ºc. electrical behavior was al...