The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...

in order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. silver-oil nanofluid prepared by electrical explosion of wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. the average size...

In this article, stream flow effectivness is based on hydraulic network studied in the shell-side of a shell and tube heat exchange as a case study. For an appropriate heat exchangers rating design to meet a specified duty, it's better to consider each stream flow separately. Using the hydraulic network principals, a set of the correlations for calculating different stream flow rates in the cro...

In this study, the thermal performance of three kinds of roofs with different heat capacity and thermal conductivity under different external conditions has been investigated using a numerical method. For this purpose, the combined solar radiation, conduction and convection heat transfer were calculated implicitly in terms of a one-dimensional finite difference method. Different high and low so...

This paper deals with the heat exchange performance prediction of a counter flow double-tube condenser for binary natural refrigerant mixtures (propane/n-butane & propane/i-butane ). The local characteristics of the heat transfer and pressure drop are calculated using a prediction method developed by authors, and the total pressure drop, the overall heat transfer coefficient and the average hea...

The disposal of Waste Activated Sludge is a major problem. The paper presents several disposal routes. The ultimate steps in these routes are indirect drying and subsequent incineration. Although the design of the indirect dryers is straightforward from a required heat input, operating temperature difference between sludge bed and heating medium and the heat transfer coefficient, this coefficie...

in this article the effect of fouling on tube side and the overall performance of preheat exchangers of crude distillation unit of petroleum refinery have been investigated. for this purpose the experimental data of australian light crude oil in surface temperature of 200-260oc and the velocity between 0.25 to 0.4 m/s have been used. first, an overall dirty heat transfer coefficient was calcula...

Experimental data was generated by performing the experiment on a plate heat exchanger for water/water system, at different flow rate and different hot water inlet temperature, at steady state conditions. Overall heat transfer coefficient (U) is determined for the performance evaluation of plate heat exchanger. The thermal properties of water (thermal Conductivity, Specific heat and density) at...

To learn about cooling of gas quenched batches, this paper reports on numerical predictions of local and average convective heat transfer coefficients, and overall pressure drops, on batches of five axially aligned, constant temperature, short cylindrical disks 25 cm diameter, 5 cm thickness with and without a concentric hole, with interdisk spacings of 5–20 cm, in axial turbulent flows of 20 b...

bubble columns are gas- liquid contactors that are widely used in chemical and bio- chemical industries. high mixing that result in high heat and mass transfer rates are amongst their advantages. heat transfer in a bubble column having a bundle of heaters investigated and the variation of heat transfer coefficient with variation in heaters pitch to diameter ratios in a bundle of heaters reporte...