This paper shows the mixed lubrication analysis between the vane tip and rolling piston in a rotary refrigerant compressor, coupling the motion equations of vane and rolling piston, the elastohydrodynamic lubrication (EHL) analysis of line contact and the equations of viscosity characteristics of lubricating oil as a function of oil pressure, oil temperature and concentration of refrigerant. Th...

Nanotechnology has the potential to introduce revolutionary changes to several areas of oil and gas industry such as exploration, production, enhanced oil recovery, and refining. In this paper, the effect of different concentrations of Fe2O3 nanoparticles as a catalyst on the heavy oil viscosity at various temperatures is studied. Furthermore, the effect of a mixture of Fe2O3 nanoparticles and ...

Biodiesel is a promising non-toxic and biodegradable alternative fuel in transport sector. Of all the biodiesel properties, specific gravity and viscosity are the most significant for the effects they have on the utilization of biodiesel fuels in unmodified engines. This paper presents models, which have been derived from experimental data, for predicting the specific gravity and dynamic viscos...

Transportation of unrefined crude oil from the production unit to a refinery or large storage area by a pipeline is difficult due to the different properties of crude in various areas. Thus, the design of a crude oil pipeline is a very complex and time consuming process, when considering all the various parameters. There were three very important parameters that play a significant role in the t...

Forced displacement of oil by polymer flooding in oil reservoir is one of the effective methods of enhanced (tertiary) oil recovery. A classical model of this process within Hele-Shaw approximation involves three-layer fluid in a Hele-Shaw cell having a variable viscosity fluid in the intermediate layer between oil and water. The goal here is to find an optimal viscosity profile of the intermed...

Hydrate plugging is the major challenge in the flow assurance of deep-sea pipelines. For water-in-oil emulsions, this risk could be significantly reduced with the addition of anti-agglomerants (AAs). Hydrates often form from water-in-oil emulsions and the measurement of emulsion and slurry viscosity constitutes the basis for the application of hydrate slurry flow technology. In this work, using...

In this paper are presented the influences of the adhesion forces occurring in hyperbolic micro contact on the oil velocity and friction forces in hyper bolic micro bearing gap. Here are elaborated the dependences between adhesive forces and oil dynamic viscosity in super t hin boundary layer and in fluences of adhesive forces on the oil velocities and friction forces in microand nano-scale ari...

The relative immobility of foam in porous media suppresses the formation of fingers during oil displacement leading to a more stable displacement which is desired in various processes such as Enhanced Oil Recovery (EOR) or soil remediation practices. Various parameters may influence the efficiency of foam-assisted oil displacement such as properties of oil, the permeability and heterogeneity of...

The lubricating oils are essential for operating engine with high efficiency. Therefore, the physical properties of oil such as flash point, pour point, kinematic viscosity, specific gravity and the American Petroleum Institute are necessary to be studied to indicate good quality of the lubricating oil. In this study, we compare the physical properties of two virgin oils with re-refining oil. T...

The oil film behavior of a series of fifteen lubricating oils was tested in a single cylinder spark ignition engine. The oil film thickness between the piston and cylinder liner of this engine was observed using the Laser Induced Fluorescence (LIF) technique. The data was examined for correlations between physical properties of the oil and characteristics of the oil film. The region of the oil ...