Impeller trimming is a proper way to alter the performance of centrifugal pump with a constant speed so as to meet the demand on the specified flow rate and head in pumping systems. The affinity law accounting for the impeller trimming is the key relation to determine the pump performance with a trimmed impeller. There seems no experimental study dealing with such an affinity law for centrifuga...

Electrospun non-woven poly(ε-caprolactone) (PCL) microfiber meshes are described as biodegradable, mechanically robust, and reusable polymeric oil sorbents capable of selectively retrieving oil from simulated oil spills in both fresh and seawater scenarios. Hydrophobic PCL meshes have >99.5% (oil over water) oil selectivity and oil absorption capacities of ~10 grams of oil per gram of sorbent m...

This paper simplifies the energy recovery process in the series hydraulic hybrid bus’ energy regeneration system into a process in which the main axle’s moment of inertia drives the secondary element variable delivery pump/motor and brings hydraulic oil from the oil tank to the accumulator. This process enables braking of the vehicle and also allows recovery of energy to the accumulator. Based ...

Oil well diagnosis usually requires dedicated sensors placed on the surface and the bottom of the well. There is significant interest in identifying the characteristics of an oil well by using data from these sensors and neural networks for data processing. The purpose of this paper is to identify oil well parameters by measuring the terminal characteristics of the induction motor driving the p...

The strong vibration of reciprocating pump in oil transportation station pipeline system will seriously affect the safe running of the equipment and pipeline. And the resonance between pipe and equipment will cause more severe damage. Therefore before the formal operation of station, not only static stress analysis, but also modal analysis and vibration analysis are necessary for the reciprocat...

In oil field applications it is often required to pump oil, gas, and water as mixtures rather than separating the fluid. Although the performance prediction of twin-screw pumps on liquids is well established, the prediction of performance of these pumps on multiphase mixtures presents a challenge. Test data of twin-screw rotary pumps are compared with predictions of performance over ranges of f...

Anti friction bearings in process pumps, by design, frequently utilize oil sump lubrication technology. For many years, it was an accepted condition that the lubricating oil used in oil sump bearing lubrication needed to be changed on a regular basis to prevent high levels of contamination that can lead to premature bearing failure, contributing to equipment downtime. Often, the indicators used...

Many studies have already considered starved lubrication. However, there have been no reports on the oil film thicknesses under steady starved EHL (elastohydrodynamic lubrication), where the ultra-low volume of oil supplied per unit time is uniform. The present study examined the relationship between the supplied oil flow rate and oil film thickness under steady starved lubrication. A ball-on-d...

An analytical study was carried out to investigate the performance of an oil supplying system of a variable speed compressor using a commercial CFD program. The simulations for the oil supplying system with the oil and air mixture were performed by varying compressor speed from 40 Hz to 90 Hz. Comparing the predicted with the measured data on the modified scroll compressor validated the simulat...