In this study, predictive capabilities of apparent viscosity of oil-based drilling fluids which is used in National Iranian South Oilfields Company (NISOC) were evaluated using Newtonian and non-Newtonian models to drive a new suitable equation. The non-Newtonian models include Bingham plastic, Power law, Herschel-Bulkley, Casson, and Robertson-Stiff. To validate the results, the calculated vis...

When drilling an oil well, the well is lined by sinking a steel casing, or liner, into the drilling mud (see Figure 1). The inside of the liner forms a central pipe, and leaves an annular gap between the outside of the liner and the surrounding rock. The inside and outside of the liner are initially filled with drilling mud, which is displaced by pumping a sequence of fluids down inside the lin...

The first stage to have access to a reservoir is the drilling operation. The proper development of this operation plays a major role in increasing productivity. It must be pointed out that the drilling fluid (mud) is pivotal in achieving this objective. Among these fluids, water-based fluids are the most common ones, which have been utilized to drill approximately 80% of all wells and are m...

In China’s unconventional oil drilling, horizontal wells are one of the main forms water-in-oil drilling fluid have been widely used due to their stable performance and excellent lubricating properties. To reduce high cost fluids at site, further pressure cuttings processing, meet requirements environmental protection, an oil-based system with a low oil-water ratio was developed. Based on resea...

During exploration for oil and gas, a technical drilling fluid is used to lubricate the drill bit, maintain hydrostatic pressure, transmit sensor readings, remove rock cuttings and inhibit swelling of unstable clay based reactive shale formations. Increasing environmental awareness and resulting legislation has led to the search for new, improved biodegradable drilling fluid components. In the ...

the continuous development of global economy with decreasing in available hydrocarbon sources and increasing discovery and extraction costs due to decrease in-situ oil and gas reservoir, displays the necessity of using new techniques for the improve rate of penetration and productivity in well. nanotechnology has already contributed significantly to technological advances in the energy industri...

Oil-based drilling fluid is used more and more in the field of oil and gas exploration. However, because of unrecyclable treating agent and hard treatment conditions, the traditional treating technologies of waste oil-based drilling fluid have some defects, such as waste of resource, bulky equipment, complex treatment processes, and low oil recovery rate. In this work, switchable deoiling agent...

In this paper, we detail our results for the impact of MWCNT on the thermal and rheological properties of oil-based drilling muds. Our analysis considers the effects of time, temperature, and MWCNT volume fraction. The scanning electron microscopy imaging technique was used to monitor the MWCNTsdispersion quality. The experimental results unveil a considerable enhancement in the thermal conduct...

Water-soluble hydrophobically associating polymers are examined with particular emphasis on their rheology for oilfield applications. The incorporation of a small amount (less than 1 mol%) of hydrophobic groups into the polymer backbone of a water-soluble polymer dramatically alters the rheological properties of the resulting material. Associating polymers have potential for use in mobility con...