while significant advances have been made on the blast analysis, applications of nonlinear analysis of structures under explosion have been limited to the frames and structural behavior of bridges subjected to blast is an issue that has attracted attention of researchers in recent years. nonlinear dynamic analysis can be lead to the most accurate responses of the structure under blast but the u...

Bridges, as an essential part of transportation system, play a special role in economy, politic and military all around the world. Serviceability of bridges is of high importance especially in emergencies, helping injured people and proportioning transportation after earthquakes. Earthquake regulation codes, normally suggest linear methods to conduct the analysis, and nonlinear analysis is bare...

in this paper coupled nonlinear equations of motion of a suspended cable with time dependent tension and velocity are derived by using hamilton’s principal. a modal analysis for a stationary sagged cable is initially carried out in order to identify the dynamic system. the natural solution is directed to compute the natural frequencies and mode shapes of the free vibration of a suspended cable....

endurance time (et) method is a relatively new performance-based earthquake method for structural evaluation and design. in this method, the structure is subjected to a gradually intensifying accelorogram(s) and its performance is assessed based on the maximum time duration that it can meet the specified performance objectives. using moment-resisting and braced frames which are rehabilitated by...

the base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. in this regard, the uniform building code provisions (ubc) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. due to the importance of the behavior of these structures unde...

the purpose of this study is to determine the effect of vierendeel panel width and vertical truss spacing ratio in an inelastic behavior of the stf system due to earthquake loads. the stf system is applied to a six-storey building that serves as apartments [2]. the stf system is used in the building in the transverse direction (n-s direction), while in the longitudinal direction (w-e direction)...

recently, scientists developed the seismic rehabilitation of structures and their points of view were changed from strength to the performance of structures. nonlinear static procedure (nsp) or pushover analysis is a new method that is chosen for its speed and simplicity in calculations. “seismic rehabilitation code” & fema356 considered this method. result of this analysis is a target displace...

Progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. Both General Services Administration (GSA) and United States Department of D...

this paper examines differences in performances of a range of torsionally stiff and flexible single story buildings designed with the provisions of iranian standard 2800. seismic nonlinear dynamic time history behavior of eight building models subjected to seven horizontal bi-directional design spectra compatible ground motions are investigated. these models cover a wide range of very torsional...

Arch dams are generally built in cantilvever monoliths. Vertical contraction joints between monoliths control the stresses due to concrete shrinkage and temperature variations. Past studies in earthquake safety evaluation of the system often show the tensile fracture and local nonlinear deformation of joints. In this paper, some nonlinear joint element constitutive models are presented to exami...