We report the development of a simple poly(dimethylsiloxane) microfluidic device for high-efficiency trapping and sorting of micron-size particles. In this device, hydrodynamic fluid flow through the sieve-like microfluidic channel sequentially fills the trap positions with particles of the trap size, and particles smaller than the trap size pass through the sieve and are trapped by smaller tra...

In this study, we developed a needle trap device packed with HKUST-1 (Cu-based metal-organic framework) for the sampling and analysis of benzene, toluene, ethylbenzene, xylene (BTEX) in ambient air first time. The was synthesized via electrochemical process. Afterwards, adsorbent into 22 gauge needles. To provide different concentrations BTEX, syringe pump connected to glass chamber inject spec...

We report an integrated microfluidic device for fine-scale manipulation and confinement of micro- and nanoscale particles in free-solution. Using this device, single particles are trapped in a stagnation point flow at the junction of two intersecting microchannels. The hydrodynamic trap is based on active flow control at a fluid stagnation point using an integrated on-chip valve in a monolithic...

A simple to implement model is presented to extract interface trap density of graphene field effect transistors. The presence of interface trap states detrimentally affects the device drain current-gate voltage relationship Ids-Vgs. At the moment, there is no analytical method available to extract the interface trap distribution of metal-oxide-graphene field effect transistor (MOGFET) devices. ...

A needle trap sampler (NTS) packed with 60–80-mesh divinylbenzene (DVB) adsorbent inside a 22-gauge stainless steel was used as micro sampling device to extract chemical compounds in electronic cigarette (e-cigarette) aerosol. The samples were then analyzed using gas chromatography (GC)-mass spectroscopy (MS) determine the constituents. Based on experimental results, e-cigarette smokers are exp...

This paper describes a system for transferring power across a transdermal needle into a smart refill port for recharging implantable drug delivery systems. The device uses a modified 26 gauge (0.46 mm outer diameter) Huber needle with multiple conductive elements designed to couple with mechanical springs in the septum of the refill port of a drug delivery device to form an electrical connectio...

We present a novel, fully integrated microfluidic bubble trap and debubbler. The 2-layer structure, based on a PDMS valve design, utilizes a featured membrane to stop bubble progression through the device. A pneumatic chamber directly above the trap is evacuated, and the bubble is pulled out through the gas-permeable PDMS membrane. Normal device operation, including continuous flow at atmospher...

BACKGROUND AND STUDY AIMS A new 25-gauge (G) endoscopic ultrasound-guided fine-needle aspiration (EUS-FNA) device (EchoTip ProCore; Cook Medical, Bloomington, Indiana, USA) has been developed, which features a hollowed-out reverse bevel to trap core samples. However, data on the differences between the diagnostic yield of the 25G EchoTip ProCore and that of a 22G standard needle are limited. ...

It remains an open question whether placebo/sham acupuncture, in which the needle tip presses the skin, can be used as a placebo device for research on pain. We compare the analgesic effect of the skin-touch placebo needle with that of the no-touch placebo needle, in which the needle tip does not touch the skin, in a double-blind crossover manner including no-treatment control in 23 healthy vol...