The effects of increasing the nickel content from 3 to 7 or 9 wt-% were investigated in high strength steel weld metals with 2 wt-% manganese. Nickel additions were beneficial to strength but detrimental to impact toughness. Significant segregation of nickel and manganese to interdendritic regions was observed at the two higher nickel contents. In these weld metals a mainly martensitic microstr...

By using an iron alloy that transforms slowly to bainite at a low temperature, it has been possible to study the development of the upper bainite under the influence of exceptionally large stresses, which are nevertheless below the yield strength of the parent austenite. It is found that a uniaxial stress whose magnitude is below the elastic limit, strongly favours the growth of compliant varia...

There are two well-known phenomena associated with the bainite reaction, both of which have been exploited here to enhance the mechanical behaviour of steel. Firstly, the bainite plate size decreases as the transformation temperature is reduced. Secondly, it is bad to have large regions of untransformed austenite in the microstructure; this is because they can transform, under the influence of ...

The growth and propagation behavior of austenite-to-bainite isothermal transformation in laser-cladded, Si-rich, and Fe-based coatings is investigated. The crystallographic features, orientation relationship at different isothermal temperatures, and the morphology of the nanostructured bainite are determined. The Nishiyama-Wassermann type orientation relationship is observed at a high temperatu...

The bainite start temperature Bs is defined as the highest temperature at which ferrite can transform by a displacive transformation. A common observation is that the bainite start temperature is very sensitive to the chemical composition, indicating that the influence of solutes is more than just thermodynamic. Empirical linear regression models have long been used to calculate the Bs in a lim...

Steels with a mixed microstructure of allotriomorphic ferrite, bainitic ferrite, retained austenite and martensite have potentially good combinations of high strength and formability. This work describes a kinetic theory for the formation of bainite in steels where the precipitation of carbides is suppressed. The theory is based on the mechanism of transformation. It includes, for example, a nu...

the unique properties of air-cooled bainitic steels have been described. a series of mn containing air-cooled bainitic steels invented by authors is presented in this paper: including low carbon granular bainitic steels, low carbon grain-boundary allotriomorphic ferrite/granular bainite duplex steels, medium and medium high carbon bainite/martensite duplex steel, and low carbon carbide free bai...

Several experimental techniques are used for phase identification and microstructure characterization of austempered vermicular cast irons (XRD, SEM, TEM and Mössbauer spectroscopy). Acicular structures were found to be composed by ferrite and austenite with average sizes compatible with those reported for bainitic ferrite in steels. An assessment of the free energy change involved in the auste...