In this paper a 3.5 GHz down conversion mixer with 20 MHz IF output signal for location-fixed WiMAX systems is presented. The proposed mixer is implemented with TSMC 0.18μm RF CMOS technology with 1.5V supply voltage which utilizes Current-Bleeding and Current-Reuse techniques to improve noise figure and conversion gain of conventional Gilbert-type structure. This mixer achieves 12 dB of conver...

A DC-offset cancellation scheme in the 5GHz directconversion receiver compliant with IEEE 802.11a wireless LAN standard is described in this paper. It uses the analog R~F4~~ i"a I oU feedback loop to eliminate the DC-offset at the output of the double-balanced mixer. The mixer has a simulation voltageA conversion gain of 13dB at 5.2GHz, noise figure of 9.67dB, -. 1) IIP3 of 7.6dBm. The solution...

The purpose of the radiometer project was to research and demonstrate the working principles of a radiometer system. The radiometer design team was composed of five members, each contributing a specific component to the final system. A radiometer system is a device that detects microwave emissions from noise producing objects [1]. These noise sources are typically objects that emit heat and the...

This work proposes a direct sequence spread spectrum transmitter with high transmission range and efficiency for audio signals. It is shown that by choosing high process gain for spread spectrum signal the data could reach a range of 55km in the 2.4GHz ISM band. By employing a light modulation scheme, we have a relaxed SNR requirement for having a low bit error rate (BER) which translates to re...

A Bit-Mixer is a function of fixed size input and output, which computes uncorrelated output from correlated input values, and its behavior is altered by parameters, called keys. Several bit-mixer constructions have been published with very fast, power efficient implementations in electronic hardware, having very little side channel leakage. In this paper a dozen cryptographic applications are ...

In this paper we discuss the stability of heterodyne terahertz receivers based on small volume NbN phonon cooled hot electron bolometers HEBs . The stability of these receivers can be broken down in two parts: the intrinsic stability of the HEB mixer and the stability of the local oscillator LO signal injection scheme. Measurements show that the HEB mixer stability is limited by gain fluctuatio...

In this paper, a low voltage low power up-conversion mixer, designed in a Chartered 0.18 μm RFCMOS technology, is proposed to realize the transmitter front-end in the frequency band of 2.4 GHz. The up-conversion mixer uses the current mirror topology and current-bleeding technique in both the driver and switching stages with a simple degeneration resistor. The proposed mixer converts an input o...

In this paper the transfer function of a system with windowed current integration is discussed. This kind of integration is usually used in a sampling mixer and the current is generated by a transconductance amplifier (TA). The parasitic capacitance (Cp) and the output resistance of the TA (Ro,TA) before the sampling mixer heavily affect the performance. Calculations based on a model including ...

in this research, the total torque input and output shafts were subjected to are used to formulate twodifferential equations using applied dynamics and fluid mechanics. the equations show that the input andoutput torques are a function of the constant geometrical parameters of a torque converter, includinginternal and external diameters of vanes, angle and length of vanes, cross section area be...

The ALMA Band 6 (211-275 GHz) receivers use sideband-separating SIS mixer-preamplifiers with dual 4-12 GHz IF outputs. The sideband-separating mixers are of the phasing type, with the LO driving two component mixers in-phase and the RF signal connected to the mixers through a quadrature hybrid. The IF outputs of the mixers are amplified, then combined in a quadrature hybrid which separates the ...