in this article, commercially pure copper samples were severely deformed by equal channel angular pressing (ecap) up to eight passes at room temperature. the effects of severe plastic deformation on the microstructure, mechanical properties, and electrical conductivity of the copper were investigated. the microstructure evolution was followed by optical microscope and field emission scanning el...

A technique of computing the pressure drop and deposition rate evolution during soot loading and the 3D distribution of deposited soot particles for micro-structured ceramic filter media is presented. Methods developed at Fraunhofer ITWM for generating 3D computer models representing the microstructure of the filter material and for computing soot particle deposition in the microstructure model...

The microstructure evolution during cold rolling of commercial purity AA1050 aluminum is investigated through numerical simulations. A finite strain elasto-viscoplastic constitutive model is employed, where the dislocation density and average grain size are taken as variables characterizing the deformed microstructure. Grain size evolution due to dynamic recrystallization is considered and the ...

The objective of this work was to examine the changes in the microstructure and macro physical properties caused by the carbonation of normalised CEM II mortar. Samples were prepared and subjected to accelerated carbonation at 20°C, 65% relative humidity and 20% CO2 concentration. On the microstructure scale, the evolutions of the cumulative pore volume, pore size distribution, and specific sur...

In this study the synthesis of molybdenum oxide nano-whiskers with circular cross-section is performed. In some areas, it was observed that also some whiskers have open tips exhibiting their hollow structures. These whiskers have side dimensions ranging 2-5 μm with an average diameter in the nanometer rang. The structure suggested the vapor-liquid-solid growth mechanism (VLS). Scanning elect...

In this study, a novel unifi ed framework for the study of both microstructural evolution and the mechanical property quantifi cation is proposed. The multistate Potts model is used to simulate the microstructural evolution, whereas a volume-compensated particle method (VCPM) is used for the mechanical property quantifi cation of the steady state microstructure. The VCPM proposed by Chen and co...

■ Abstract The phase-field method has recently emerged as a powerful computational approach to modeling and predicting mesoscale morphological and microstructure evolution in materials. It describes a microstructure using a set of conserved and nonconserved field variables that are continuous across the interfacial regions. The temporal and spatial evolution of the field variables is governed b...

In the present paper, the evolution of an oxidation process has been associated to the collective atomic arrangement, the microstructure one. This microstructural analysis encompasses a metallographic examination and a relation of electricity to chemical changes in salt-water solution. The electrochemical experimental techniques used include corrosion potential measurements. To seek a deeper un...

Today, the characterisation of the microstructure of cement-based materials using non-destructive techniques has become an important topic of study, and among them, the impedance spectroscopy has recently experienced great progress. In this research, mortars with two different contents of fly ash were exposed to four different constant temperature and relative humidity environments during a 180...